Dell PowerConnect 6224P Configuration Guide - Page 93
Example #1: Enable Routing for the Switch, Port Routing Example Network Diagram
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
CLI Examples The configuration commands used in the following example enable RIP on ports vlan 2 and vlan 3 as shown in the network illustrated in Figure 4-6. Layer 3 Switch acting as a router VLAPNort31/0/3 1921.9123.1030.3.3..11 PVoLrtA1N/0/22 11929.215.10.52.02.2.2 VLAN 5 192.64.4.1 Port 1/0/5 192.64.4.1 Subnet 2 Subnet 3 Subnet 5 Figure 4-6. Port Routing Example Network Diagram Example #1: Enable Routing for the Switch The following sequence enables routing for the switch: console#config ip routing exit Example #2: Enable Routing for Ports The following command sequence enables routing and assigns IP addresses for VLAN 2 and VLAN 3. console#config interface vlan 2 routing ip address 192.150.2.2 255.255.255.0 exit interface vlan 3 routing ip address 192.130.3.1 255.255.255.0 exit exit Routing Configuration 93