Dell PowerEdge 2850 Activating the Integrated RAID Controller - Page 6
Locating the RAID Memory Module, Installing the RAID Controller Memory
View all Dell PowerEdge 2850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
www.dell.com | support.dell.com Figure 1-1. Locating the RAID Memory Module RAID battery RAID battery holder RAID memory module RAID key B A SCSI A SCSI B 6 Push the ejectors on the RAID memory module connector down and outward to allow the memory module to be inserted into the connector. See Figure 1-2. Figure 1-2. Installing the RAID Controller Memory Module ejectors (2) alignment key 7 Locate the memory module that is included with the upgrade kit. 8 Align the RAID memory module's edge connector with the alignment key, and insert the memory module into the connector. See Figure 1-2. NOTE: Do not substitute unbuffered DDR 2 memory modules such as those used for system memory. Use the memory module supplied in the RAID upgrade kit. 1-4 Activating the Integrated RAID Controller