Dell PowerEdge PDU Metered LCD Cabling PowerEdge T620 - Page 6

Replacing a power supply on a PowerEdge T620, system with a CMA

Get Dell PowerEdge PDU Metered LCD PDF manuals and user guides View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Cable Routing Procedures for Dell PowerEdge T620 Systems 4. Once you have routed all of the cables through the CMA, dress the cable slack between the back of the system and the entrance of the CMA using the tie wraps provided in the CMA kit. 5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed (retracted) position. 6. Extend the system out of the rack to verify that there is sufficient slack in the cables on both ends of the CMA. See Figure 4 for an example of a completed left-side mounted CMA installation. See Figure 5 for an example of a completed right-side mounted CMA installation. Figure 4. Left-side mounted CMA installation Figure 5. Right-side mounted CMA installation Section 2: Replacing a power supply on a PowerEdge T620 system with a CMA 1. Swing the CMA to its service position as described in the CMA Installation Instructions provided with the CMA kit. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Cable Routing Procedures for Dell PowerEdge T620 Systems
6
4.
Once you have routed all of the cables through the CMA, dress the cable slack between the back of
the system and the entrance of the CMA using the tie wraps provided in the CMA kit.
5.
Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps
are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed
(retracted) position.
6.
Extend the system out of the rack to verify that there is sufficient slack in the cables on both ends
of the CMA.
See Figure 4 for an example of a completed left-side mounted CMA installation.
See Figure 5 for an
example of a completed right-side mounted CMA installation.
Left-side mounted CMA installation
Figure 4.
Right-side mounted CMA installation
Figure 5.
Section 2:
Replacing a power supply on a PowerEdge T620
system with a CMA
1.
Swing the CMA to its service position as described in the
CMA Installation Instructions
provided
with the CMA kit.