Dell PowerStore 1200T EMC PowerStore Hardware Information Guide for PowerStore - Page 25

The following figure shows the location of these components: Figure 20. Access Module rear view with component locations Table 21. Access Module component locations Location Description 1 100GbE ports (QSFP28) 2 Micro USB port (not used) 3 USB port (not used) 4 1GbE RJ-45 management ports (for support only) Figure 21. Access Module LEDs Table 22. Access Module LEDs LED Power status Location 1 Fault status 2 System ID 3 Daisy chain ID 4 State Green Off Amber Off Blinking blue Off 00 through 02 NVMe expansion enclosure AC power supply The NVMe expansion enclosure includes two 1800W AC power supplies. Description Power on. Power off. Faulted hardware. No fault has occurred. Normal operation. System ID mode is enabled. System ID mode is not enabled. Identifies where in the daisy chain the expansion enclosure is located: ● 00 - First expansion enclosure ● 01 - Second expansion enclosure ● 02 - Third expansion enclosure 24 Drive 2.5 Inch NVMe expansion enclosure (ENS24) component descriptions 25