Dell PowerStore 1200T EMC PowerStore Setting Up PowerStore Manager
Dell PowerStore 1200T Manual
 |
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerStore 1200T manual content summary:
- Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 1
After completing the Initial Configuration Wizard (ICW), use this guide to configure your support settings and learn how to use the primary features of . NOTE: You can log in with the Administrator (admin) account. The service user account cannot log in to PowerStore Manager. About this task It is - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 2
To resolve problems more quickly and easily, enable Support Connectivity. About this task For more information about Support Connectivity, Guide. Steps 1. Select the Settings icon, and then select Support Connectivity in the Support section. 2. Select the Connection Type tab. 3. Enable Support - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 3
information about how this feature works, see the PowerStore Security Configuration Guide. Steps 1. Select the Settings icon, and then select CHAP SSH service interface disabled unless it is needed to perform service operations on the appliance. After performing the necessary service operations, - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 4
the PowerStore Security Configuration Guide. Steps 1. Select service user credentials. The service account enables users to perform the following functions: ● Perform specialized appliance service scripts for monitoring and troubleshooting PowerStore does not support accessing the PowerStore Manager - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 5
Common tasks Customize table views in PowerStore Manager Customize PowerStore Manager table views by selecting which columns to display, filter, and sort. Steps 1. To show or hide columns: a. Select Show/Hide Table Columns. b. Select the check boxes for the columns that you want to display, or clear - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 6
information about how this feature works, see the PowerStore Security Configuration Guide. Steps 1. Select the Settings icon, and then select Users tool to import data from your existing supported storage systems. You can import data from manually or configure the system to automatically take snapshots on - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 7
-sensitive help entries for these features. For in-depth information about how this feature works, see the PowerStore Protecting Your Data Guide. NOTE: This workflow is a suggestion; the order that is shown is not required. Steps 1. Under Protection, select Protection Policies. 2. To configure - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 8
https:// www.dell.com/powerstoredocs. ● Troubleshooting For information about products, software updates, licensing, and service, go to https://www.dell.com/support and locate the appropriate product support page. ● Technical support For technical support and service requests, go to https://www.dell - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 9
Figure 1. PowerStore Manager screen showing the specific help link for a feature 9 - Dell PowerStore 1200T | EMC PowerStore Setting Up PowerStore Manager - Page 10
of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 - 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Rev. A03
July 2022
Dell EMC PowerStore Setting Up PowerStore
Manager
After completing the Initial Configuration Wizard (ICW), use this guide to configure your support settings and learn how to use
the primary features of your system.
Topics:
•
Configuration walkthrough
•
Common tasks
•
Additional Resources
Configuration walkthrough
Prerequisites
Log in to the PowerStore Manager with your browser using the IP address of the cluster.
NOTE:
You can log in with the Administrator (
admin
) account. The service user account cannot log in to PowerStore
Manager.
About this task
It is recommended that you complete the following one-time setup activities for the best experience and take full advantage of
your PowerStore system.
Steps
1.
Configure support connectivity
If you have already configured Support Connectivity from the ICW, you can skip this step.
2.
Provide contact information for remote support
3.
Configure storage network
4.
Configure email and SMTP alert notification preferences
5.
Enable CHAP
6.
Enable SSH management
7.
Enable HTTP Redirect
Next steps
This guide also provides an overview of many common tasks you can perform on your PowerStore system.
●
Customize table views
●
Customize login message
●
Add users
●
Import data from external storage systems
●
Create data protection policies
●
Configure storage resources
●
Configure host access
●
Upgrading PowerStore software
1