Dell PowerStore 1200T EMC PowerStore Networking Guide for PowerStore T Models - Page 55
Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
12 Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches This chapter includes the following information. Topics: • Sample configuration • Install the Top-of-Rack switches into the PowerStore T model cabinet • Configure Dell PowerSwitch Series for Storage services Sample configuration This document describes the steps to deploy PowerStore T model with a single cluster consisting of one appliance with a single base enclosure. Hardware The sample deployment used in this document demonstrates configuring the PowerStore T model appliance with: ● A single Dell PowerSwitch Series S4148 Management switch NOTE: The following configuration sections assume that you have completed initial deployment of the PowerStore T model appliance and the Management switch and networks are successfully configured. ● Two Dell PowerSwitch Series S4148 Top-of-Rack (ToR) switches with added I/O modules and a Virtual Link Trunk (VLT) connection between the switches. NOTE: If you are configuring PowerStore T model with third-party switches, please refer to the switch proprietary documentation for commands and specific details. See the PowerStore Third-party Switch Simple Support Matrix for the list of supported switches, which is available from https://dell.com/powerstoredocs. ● PowerStore 500T model appliance with a 4-port card and two I/O modules. Networks The sample used in this guide demonstrates the following network connectivity between the PowerStore T model nodes and ToR switches. Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches 55