Dell PowerStore 1200T EMC PowerStore Networking Guide for PowerStore T Models - Page 59

Details, Notes, port channel 50, on I/O Module 0

Get Dell PowerStore 1200T PDF manuals and user guides View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Table 23. Switch resources for Storage services worksheet (completed) (continued) Step Details Notes 7. Record the port channel ID used for connectivity between the ToR switches and the uplinks. If deploying with MC-LAG (VLT), enter the port channel ID used for the uplink. port channel 50 Only a single port channel ID is required for MC-LAG. Alternatively, record the uplink port channel IDs required for L2 Uplinks without MC-LAG. L2 Uplinks without MC-LAG connectivity requires two port channel IDs. 1. Port channel ID for L2 Uplinks without MC-LAG N/A 2. Port channel ID for L2 Uplinks without MC-LAG N/A 8. Reserve the network resources required to configure the networks and the ports to connect from the PowerStore T model appliance nodes to the Top-of-Rack (ToR) switch ports for each Storage network you are configuring. You can put multiple storage networks on the same ports, or you can connect each storage network through different ports. When cabling from the node ports to the ToR switch ports, corresponding ports on Node A and Node B should connect to opposite switches. NOTE: Ports 0 and 1 of the 4-port card are reserved for the cluster network with all PowerStore T model appliances. If deploying a PowerStore 500T model appliance ports 2 and 3 of the 4-port card are reserved for connectivity to the 24 Drive 2.5 Inch NVMe (ENS24) expansion enclosures. iSCSI connectivity VLAN ID Record which appliance node port Node A Port 2 on I/O Module 0 200 To cable to the ToR switch number and port: ToR Switch 1 Switch port 7 Node B Port 2 on I/O Module 0 ToR Switch 2 Switch port 48 NVMe/TCP host connectivity VLAN ID Record which appliance node port Node A Port 0 on I/O Module 0 300 To cable to the ToR switch number and port: ToR Switch 1 Switch port 5 Node B Port 0 on I/O Module 0 ToR Switch 2 Switch port 50 Replication and Import NOTE: Replication and Import networks cannot be separated and must run over the same ports. VLAN ID Record which appliance node port Node A Port 2 on I/O Module 0 400 To cable to the ToR switch number and port: ToR Switch 1 Switch port 7 Node B Port 2 on I/O Module 0 ToR Switch2 Switch port 48 Network Attached Storage (NAS) Must be configured in an LACP bond. VLAN ID 500 Record the LACP (port channel) ID for the node connections: Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Table 23. Switch resources for Storage services worksheet (completed) (continued)
Step
Details
Notes
7.
Record the port channel ID used for connectivity between the ToR switches and the uplinks.
If deploying with MC-LAG (VLT), enter the port
channel ID used for the uplink.
Only a single port channel ID is required for MC-LAG.
port channel 50
Alternatively, record the uplink port channel IDs required for L2 Uplinks without MC-LAG.
L2 Uplinks without MC-LAG connectivity requires two port channel IDs.
1. Port channel ID for L2 Uplinks without MC-LAG
N/A
2. Port channel ID for L2 Uplinks without MC-LAG
N/A
8.
Reserve the network resources required to configure the networks and the ports to connect from the PowerStore T
model appliance nodes to the Top-of-Rack (ToR) switch ports for each Storage network you are configuring.
You can put multiple storage networks on the same ports, or you can connect each storage network through different
ports.
When cabling from the node ports to the ToR switch ports, corresponding ports on Node A and Node B should connect
to opposite switches.
NOTE:
Ports 0 and 1 of the 4-port card are reserved for the cluster network with all PowerStore T model
appliances. If deploying a PowerStore 500T model appliance ports 2 and 3 of the 4-port card are reserved for
connectivity to the 24 Drive 2.5 Inch NVMe (ENS24) expansion enclosures.
iSCSI connectivity
VLAN ID
200
Record which appliance node
port
To cable to the ToR switch
number and port:
Node A
Port
2 on I/O Module 0
ToR Switch
1
Switch port
7
Node B
Port
2 on I/O Module 0
ToR Switch
2
Switch port
48
NVMe/TCP host connectivity
VLAN ID
300
Record which appliance node
port
To cable to the ToR switch
number and port:
Node A
Port
0 on I/O Module 0
ToR Switch
1
Switch port
5
Node B
Port
0 on I/O Module 0
ToR Switch
2
Switch port
50
Replication and Import
NOTE:
Replication and Import networks cannot be
separated and must run over the same ports.
VLAN ID
400
Record which appliance node
port
To cable to the ToR switch
number and port:
Node A
Port
2 on I/O Module 0
ToR Switch
1
Switch port
7
Node B
Port
2 on I/O Module 0
ToR Switch
2
Switch port
48
Network Attached Storage (NAS)
Must be configured in an LACP bond.
VLAN ID
500
Record the LACP (port channel) ID for the node connections:
Configuring PowerStore T model with Dell PowerSwitch Series S4148 Top-of-Rack switches
59