Dell PowerStore 3000T EMC PowerStore Host Configuration Guide - Page 20
Configuring VMware vSphere with PowerStore Storage in a Multiple Array Configuration
View all Dell PowerStore 3000T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Right-click the affected DataStore. 4. Click Edit Space Reclamation. 5. Set the value (with ESX 6.7 or later, set to 100MB/s, with ESX 6.5, set to Low). 6. Click OK. Configuring VMware vSphere with PowerStore Storage in a Multiple Array Configuration Use the listed recommended values when multiple arrays are connected to vSphere. The following table lists the recommended vSphere settings when multiple storage arrays are connected to vSphere (in addition to PowerStore). Follow these recommendations instead of other recommendations included in this chapter. For reference, this table also includes the corresponding recommendations for settings when vSphere is connected to PowerStore storage only. Setting Scope/Granularity UCS FC Adapter Policy Per vHBA Cisco nfnic lun_queue_depth_per_path Global Disk.SchedNumReqOutstanding LUN Disk.SchedQuantum Global Disk.DiskMaxIOSize Global XCOPY (/DataMover/ MaxHWTransferSize) Global XCOPY (Claim Rule) vCenter Concurrent Clones vCenter (config.vpxd.ResourceManager.max CostPerHos) Multi-Storage Setting default default (32) default default 1MB default (4MB) No Guidance default (8) PowerStore Only Setting default default (32) default default 1MB default (4MB) No Guidance default (8) • UCS FC Adapter Policy - The total number of I/O requests that can be outstanding on a per-virtual Host Bus Adapter (vHBA) in UCS. • Cisco nfnic lun_queue_depth_per_path - Cisco nfnic driver setting to set the LUN queue depth per path. The default value for this setting is 32 (recommended). For details on Cisco nfnic settings, refer to the Cisco nfnic driver documentation on the Cisco website. • DiskSchedNumReqOutstanding - The total number of outstanding commands permitted from all virtual machines oollectively on the host to a LUN. For details, refer to VMware vSphere documentation. • Disk.SchedQuantum - The maximum number of consecutive "sequential" I/Os allowed from one VM before forcing a switch to another VM. For details, refer to VMware vSphere documentation. • Disk.DiskMaxIOSize - THe maximum I/O size ESX allows before splitting I/O requests. For details, refer to Setting the Maximum I/O • XCOPY (/DataMover/MaxHWTransferSize) - The maximum number of blocks used for XCOPY operations. For details, refer to VMware vSphere documentation. • vCenter Concurrent Clones (config.vpxd.ResourceManager.maxCostPerHost) - The maximum number of concurrent full clone operations allowed (the default value is 8). For details, refer to VMware vSphere documentation. Multipathing Software Configuration Configuring Native Multipathing PowerStore supports the Native Multipathing Plugin (NMP). This section describes the procedure required for configuring native multipathing for PowerStore volumes. For best performance, it is recommended to do as follows: • Set the NMP Round Robin path selection policy on PowerStore volumes presented to the ESXi host. 20 Host Configuration for VMware vSphere ESXi