Dell S2817Q User Guide - Page 21

Connecting Your Monitor, Connecting the HDMI cable

Page 21 highlights

Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1 Turn off your computer. 2 Connect the HDMI/DP-mDP/USB cable from your monitor to the computer. 3 Switch on your monitor. 4 Select the correct input source at Monitor OSD Menu and turn on your computer. NOTE: S2817Q default setting is DP 1.2. DP 1.1 Graphic card may not display normally. Please refer to "product specific problems - No image when using DP connection to the PC" to change default setting. Connecting the HDMI cable Connecting the mDP (or DP) cable NOTE: Default is DP port. Select input source on monitor to switch to mDP. Setting Up the Monitor | 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

Setting Up the Monitor
|
21
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions
.
To connect your monitor to the computer:
1
Turn off your computer.
2
Connect the HDMI/DP-mDP/USB cable from your monitor to
the computer.
3
Switch on your monitor.
4
Select the correct input source at Monitor OSD Menu and turn on your
computer.
NOTE:
S2817Q
default setting is DP 1.2. DP 1.1 Graphic card may not display
normally. Please refer to “
product specific problems – No image when using DP
connection to the PC
” to change default setting.
Connecting the HDMI cable
Connecting the mDP (or DP) cable
NOTE:
Default is DP port. Select input source on monitor to switch to mDP.