Dell Vostro 20 All-in-One 3052 Dell Vostro 203052 Owners Manual - Page 11
Installing the Hard Drive, Removing the Power-Switch Board, back cover, optical-disk drive, stand
View all Dell Vostro 20 All-in-One 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the Hard Drive 1. Place the hard-drive in the bracket. 2. Tighten the screws that secure the hard-drive to the bracket. 3. Slide the hard-drive into the screw holes of the display bracket. 4. Tighten the screw that secures the hard-drive to the computer. 5. Connect the hard-drive cable. 6. Install: a. back cover b. optical-disk drive c. stand 7. Follow the procedures in After Working Inside Your Computer. Removing the Power-Switch Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. optical-disk drive c. back cover 3. Perform the following steps as shown in the illustration: a. Press the locking tab that secures the power-switch to the computer [1]. b. Lift the power-switch board [2]. c. Lift the lock tab and disconnect the power switch cable from the computer [3.4]. 11