Dell Vostro 20 All-in-One 3052 Dell Vostro 203052 Owners Manual - Page 13
Installing the System-Board Shield, Removing the Memory, back cover, optical-disk drive, stand
View all Dell Vostro 20 All-in-One 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the System-Board Shield 1. Align the system-board shield on the system board. Tighten the screws to secure it to the computer. 2. Install: a. back cover b. optical-disk drive c. stand 3. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. optical-disk drive c. back cover d. system-board shield 3. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory module from its connector. 13
Installing the System-Board Shield
1.
Align the system-board shield on the system board. Tighten the screws to secure it to the computer.
2.
Install:
a.
back cover
b.
optical-disk drive
c.
stand
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
13