Dell XPS 710 H2C Owner's Manual - Page 85
Removing PCI and PCI Express Cards
View all Dell XPS 710 H2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
book.book Page 85 Friday, October 27, 2006 4:02 PM 1 2 4 6 3 5 7 1 PCI card 4 PCI Express x8 card 7 PCI Express x1 card slot 2 PCI Express x16 card 5 PCI Express x8 card slot 3 PCI Express x16 card slot 6 PCI Express x1 card Removing PCI and PCI Express Cards NOTICE: To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer chassis. NOTICE: If your computer came with a PCI graphics card installed, removal of the card is not necessary when installing additional graphics cards; however, the card is required for troubleshooting purposes. If you remove the card, store it in a safe and secure location. NOTICE: If you have the optional dual graphics card configuration, see "Removing a PCI Express Graphics Card from a Dual Configuration" on page 91 to remove or replace a graphics card. 1 Follow the procedures in "Before You Begin" on page 75. 2 Remove the computer cover (see "Removing the Computer Cover" on page 76). 3 Disconnect any cables connected to the card. 4 Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card retainer back through the chassis wall. 5 If present, press the tab on the card retention device that lays over the installed cards and lift it to gain full access to the card. Removing and Installing Parts 85