Denon AVR-2805S Owners Manual - Page 32
Setting the Channel Level - avr 2805 reset
View all Denon AVR-2805S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6 Set the distance between the center speaker and listening position. The distance changes in units of 0.1 foot (0.03 meters) each time the button is pressed. Select the value closest to the measured distance. (Remote control unit) Example: When the distance is set to 12 feet for the center speaker If "Yes" is selected for "Default", the settings are automatically reset to the default values. Please note that the difference of distance for every speaker should be 20 ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line. When "Step" is selected, you can select the unit of "1ft (0.1m)" or "0.1ft (0.01m)". 7 Enter the setting. The Speaker Setup Menu reappears. The AVR-2805/985 automatically sets the optimum surround delay time for the listening room. (Remote control unit) NOTE: • If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 18). 2-3 Setting the Channel Level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit. (For details, see page 68.) 1 Select "Channel Level" at the Speaker Setup Menu. (Remote control unit) *Speaker Setup Channel Level 2 Display the Channel Level screen. (Remote control unit) *Channel Level T.Tone: Auto 32