Denon AVR 2808CI Serial Protocol - Page 10

COMMAND PARAMETER function example PS TRE UP TREBLE UP/DOWN , direct change to **dB PSTRE UP TRE DOWN **:00 to 99 by ASCII , 50=0dB PSTRE DOWN TRE ** ---AVR-2808 can be operated from -6 to +6(44 to 56) PSTRE 50 TRE ? Return PSTRE Status PSTRE ? DRC AUTO DRC direct change PSDRC AUTO DRC LOW PSDRC LOW DRC MID PSDRC MID DRC HI PSDRC HI DRC OFF PSDRC OFF DRC ? Return PSDRC Status PSDRC ? DCO OFF D.COMP direct change PSDCO OFF DCO LOW PSDCO LOW DCO MID PSDCO MID DCO HIGH PSDCO HIGH DCO ? Return PSDCO Status PSDCO ? LFE UP LFE UP/DOWN , direct change to **dB PSLEE UP LFE DOWN **:00 to 99 by ASCII , 00=0dB, 10=-10dB PSLFE DOWN LFE ** ---AVR-2808 can be operated from 0 to -10 PSLFE 10 LFE ? Return PSLFE Status PSLFE ? EFF ON EFFECT ON/OFF , EFFECT LEVEL direct change to **dB PSEFF UP EFF OFF **:00 to 99 by ASCII , 00=0dB, 10=10dB PSEFF DOWN EFF ** ---AVR-2808 can be operated from 1 to 15 PSEFF ** EFF ? Return PSEFF Status PSEFF ? DEL UP DELAY UP/DOWN , direct change to ***dB PSDEL UP DEL DOWN ***:000 to 999 by ASCII , 000=0ms, 300=300ms PSDEL DOWN DEL *** ---AVR-2808 can be operated from 0 to 300 PSDEL *** DEL ? Return PSDEL Status PSDEL ? AFD ON AFDM ON/OFF PSAFD ON AFD OFF PSAFD OFF AFD ? Return PSAFD Status PSAFD ? PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) - 10 -