Denon AVR 2808CI Serial Protocol - Page 15

COMMAND PARAMETER function Z3 PHONO MULTI ZONE-3 mode set , and select source at AVR-2808 | ---The name of PARAMETER is IPOD the same as that of the time of SI COMMAND. SOURCE MULTI ZONE-3 mode cancel UP MULTI ZONE-3 VOLUME UP/DOWN , direct change to **dB DOWN ** **:10 to 99 by ASCII , 80=0dB, 99=---(MIN) ON MULTI ZONE-3 ON/OFF change at AVR-2808 OFF ? Return Z3 Status Z3MU ON ZONE3 OUTPUT MUTE ON/OFF change OFF ? Return Z3MU Status Z3CS ST ZONE3 Channel setting MONO ? Return Z3CS Status Z3CV FL UP ZONE3 CHANNEL VOLUME UP/DOWN , direct change to **dB FL DOWN ---FRONT Lch FL ** **:38 to 62 by ASCII , 50=0dB FR UP ZONE3 CHANNEL VOLUME UP/DOWN , direct change to **dB FR DOWN ---FRONT Rch FR ** **:38 to 62 by ASCII , 50=0dB ? Return Z2CV Status Z3HPF ON ZONE3 HPF ON/OFF OFF ? Return Z3HPF Status Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) Z3 COMMAND ：Invalid at AVR-988 and AVC-2808 for JAPAN example Z3PHONO | Z3IPOD Z3SOURCE Z3UP Z3DOWN Z380 Z3ON Z3OFF Z2? Z3MUON Z3MUOFF Z3MU? Z3CSST Z3CSMONO Z3CS? Z3CVFL UP Z3CVFL DOWN Z3CVFL 50 Z3CVFR UP Z3CVFR DOWN Z3CVFR 50 Z3CV? Z3HPFON Z3HPFOFF Z3HPF? - 15 -