Denon AVR-3805 Auto Setup Specifications
Denon AVR-3805 Manual
 |
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Denon AVR-3805 manual content summary:
- Denon AVR-3805 | Auto Setup Specifications - Page 1
O N I C S ( U S A ), LLC. Specifications and Setup Procedure for Non-DENON Microphone Use for AVR-3805 Auto Setup and Room EQ Function Required Microphone Specifications for DENON Auto-Setup and Room EQ • Element : Electric Condenser Microphone • Polar Pattern : Omni-directional • Sensitivity : -40 - Denon AVR-3805 | Auto Setup Specifications - Page 2
(for the on-screen display) with the AVR-3805 • Connect the microphone with the microphone amplifier • Turn on the AVR-3805 and the "microphone amplifier" • Turn on the "Phantom Supply" on the microphone amplifier AVR3805 Speaker Use the internal test tones for mic amp calibration. Measure the - Denon AVR-3805 | Auto Setup Specifications - Page 3
D E N O N E L E C T R O N I C S ( U S A ), LLC. Push the "SYSTEM SETUP" button on AVR-3805 • Select "2. Speaker Setup" • Select "3. Channel Level" 3 - Denon AVR-3805 | Auto Setup Specifications - Page 4
Level measures 80 dB(C-weighted) • Once the 'Main Volume" as been set , connect the output of microphone amplifier to the RMS Volt Meter • Adjust the "microphone amplifier's gain" as the RMS Volt Meter becomes about 120[mV RMS] • Once set, exit out of 'System Setup' and turn off the AVR-3805 4 - Denon AVR-3805 | Auto Setup Specifications - Page 5
Microphone Amplifier • Connect the output of the microphone amplifier to the AVR-3805's front panel 'V.AUX' Left channel audio input - located behind Trap Door • Turn on the AVR-3805 • Push the "SYSTEM SETUP" button on the remote or front panel • Select "1. Auto Setup/Room EQ" • Select "5. Mic - Denon AVR-3805 | Auto Setup Specifications - Page 6
D E N O N E L E C T R O N I C S ( U S A ), LLC. • Change the setting to "V.AUX L" • Press the "SYSTEM SETUP" button on the remote or front panel • Select "1. Auto Setup" 6 - Denon AVR-3805 | Auto Setup Specifications - Page 7
D E N O N E L E C T R O N I C S ( U S A ), LLC. • Start "Auto-Setup" Once Auto Setup and Room EQ has completed, please continue with 'System Setup' as described in the Owner's Manual. 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
D
E
N
O
N
E
L
E
C
T
R
O
N
I
C
S
(
U
S
A
) ,
L L C
.
1
Specifications and Setup Procedure for Non-DENON Microphone Use for AVR-3805 Auto
Setup and Room EQ Function
Required Microphone Specifications for DENON Auto-Setup and Room EQ
•
Element : Electric Condenser Microphone
•
Polar Pattern : Omni-directional
•
Sensitivity : -40 dBV
(0dB = 1V/1Pa)
•
Frequency Response : 20-20kHz Flat Response (Ex: BEHRINGER ECM-8000)
Required Microphone Amplifier Specification for DENON Auto-Setup Room EQ
•
Gain : 29 dB
•
Frequency Response : 10-30kHz Full Flat
Microphone Placement
•
Set the microphone using a microphone stand, or other method, at the prime listening
point
•
Point the top of the microphone toward the ceiling
•
Adjust the height so that the top of microphone to matches the height of your ear when
sitting
Listening
Height
of
Microphone