Denon AVR-3805 Auto Setup Specifications - Page 4

Set the Parameter Test Tone to 'Manual' and Test Tone Start to 'Yes - setup

Get Denon AVR-3805 PDF manuals and user guides
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

D E N O N E L E C T R O N I C S ( U S A ), LLC. • Set the Parameter "Test Tone" to 'Manual' and "Test Tone Start" to 'Yes' • Once the test tone for the Front Left (FL) speaker starts, check the Sound Pressure Level at the Listening Point with an SPL Meter. You do not have to check any of the other channels. • Adjust the "Main Volume" so that the Sound Pressure Level measures 80 dB(C-weighted) • Once the 'Main Volume" as been set , connect the output of microphone amplifier to the RMS Volt Meter • Adjust the "microphone amplifier's gain" as the RMS Volt Meter becomes about 120[mV RMS] • Once set, exit out of 'System Setup' and turn off the AVR-3805 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
D
E
N
O
N
E
L
E
C
T
R
O
N
I
C
S
(
U
S
A
) ,
L L C
.
4
•
Set the Parameter “Test Tone” to ‘Manual’ and “Test Tone Start” to ‘Yes’
•
Once the test tone for the Front Left (FL) speaker starts, check the Sound Pressure Level
at the Listening Point with an SPL Meter.
You do not have to check any of the other
channels.
•
Adjust the “Main Volume” so that the Sound Pressure Level measures 80 dB(C-weighted)
•
Once the ‘Main Volume” as been set , connect the output of microphone amplifier to the
RMS Volt Meter
•
Adjust the “microphone amplifier’s gain” as the RMS Volt Meter becomes about 120[mV
RMS]
•
Once set, exit out of ‘System Setup’ and turn off the AVR-3805