Home » Denon Manuals » Home Theater Systems » Denon AVR-5805MK2 » Manual Viewer

Denon AVR-5805MK2 Serial Protocol

Denon AVR-5805MK2 - AV Receiver Manual

UPC - 081757507400

View all Denon AVR-5805MK2 manuals

Add to My Manuals
Save this manual to your list of manuals

Denon AVR-5805MK2 manual content summary:

Denon AVR-5805MK2 | Serial Protocol - Page 1
DENON AVR/AVC control protocol Application model : AVR-5805/AVC-A1XV Application terminal : RS-232C/ Ethernet Connector specification 1. RS-232C Connector type : DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND ,
Denon AVR-5805MK2 | Serial Protocol - Page 2
type ɿ RJ-45(10BASE-T/100BASE-TX) Example ᶃ Ethernet PC Cross cable AVR/AVC Example ᶄ PC HUB Ethernet Straight cable Ethernet Straight cable AVR/AVC Communication format ɿ Communication system Communication speed Communication port Communication data
Denon AVR-5805MK2 | Serial Protocol - Page 3
NETWORK SETUP of AVR-5805/AVC-A1XV >Procedure of Network Setup mode. (1)Push the POWER switch Power Saving> "OFF"---Use this setting when using the AVR-5805/AVC-A1XV connected in a network. "ON"--- Use this setting when not using the AVR-5805/AVC-A1XV connected in a network. This setting is
Denon AVR-5805MK2 | Serial Protocol - Page 4
a system(AVR/AVC) if the 'request command' (COMMAND+?+CR(0x0D)) has came from a controller. The RESPONSE should be sent within 200ms of receiving the COMMAND function name CDR/TAPE : function name THX SURROUND EX : surround mode name SUPER STADIUM : surround mode name *Special Parameter--- ? :
Denon AVR-5805MK2 | Serial Protocol - Page 5
The example of a command * is the meaning of 0x0D. SIDVD : Select Input source DVD MSTHX SURROUND EX : surround Mode Set to THX SURROUND EX MVUP : Master Volume UP PWON : system PoWer ON PWSTANDBY : system PoWer STANDBY SI? : Request command for now playing input
Denon AVR-5805MK2 | Serial Protocol - Page 6
COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including
Denon AVR-5805MK2 | Serial Protocol - Page 7
direct change to ***dB **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) CHANNEL VOLUME UP/DOWN , direct change to ***dB ---FRONT Lch **:38 to 62 by ASCII **:00,38 to 62 by ASCII , 50=0dB, 00=OFF ---SURROUND L(A)ch **:38 to 62 by ASCII , 50=0dB ---SURROUND R(A)ch **:38 to 62 by ASCII , 50=0dB example PWON
Denon AVR-5805MK2 | Serial Protocol - Page 8
Rch (SBch 2SP) **:38 to 62 by ASCII , 50=0dB SB DOWN SB ** EXLA UP EXLA DOWN EXLA ** EXRA UP ---SURROUND BACKch (SBch 1SP) **:38 to 62 by ASCII , 50=0dB ---EX L(A) ch **:38 to 62 by ASCII , 50=0dB EXRA DOWN EXRA ** EXLB UP ---EX R(A)
Denon AVR-5805MK2 | Serial Protocol - Page 9
COMMAND CV MU PARAMETER EXLC UP EXLC DOWN EXLC ** EXRC UP EXRC DOWN EXRC ** ON function ---EX L(C) ch **:38 to 62 by ASCII , 50=0dB ---EX R(C) ch **:38 to 62 by ASCII , 50=0dB OUTPUT MUTE ON/OFF change OFF SI PHONO Select INPUT source CD TUNER DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.
Denon AVR-5805MK2 | Serial Protocol - Page 10
---Invalid at AVR-5805 set force ANALOG INPUT mode set EXT.IN-1 or EXT.IN mode set EXT.IN-2 mode SURROUND mode set ---This is received as "SATNDARD". All are received as "STANDARD" , the surround mode which changed return as EVENT. All are received as "THX SURROUND" , the surround mode which changed
Denon AVR-5805MK2 | Serial Protocol - Page 11
: GAME MODE : PRO LOGIC The BOLD COMMANDS are new. function Both are received as "5CH/7CH/9CH STEREO" , the surround mode which changed return as EVENT. ---Invalid at AVR model ---Invalid at AVR model PARAMETER setting TONE DEFEAT ON/OFF SURROUND BACK SP MODE set ---MTRX ON = SURR.EX ON = DSCRT ON
Denon AVR-5805MK2 | Serial Protocol - Page 12
when INPUT source isn't TUNER. The BOLD COMMANDS are new. example PSROOM EQ:AUDYSSEY PSROOM EQ:FRONT PSROOM EQ:FLAT PSROOM EQ:MANUAL PSROOM EQ:OFF PSDELAY UP PSDELAY DOWN PSDELAY 200 TFUP * TFDOWN * TF105000 (1050.00kHz at AM) TPUP
Denon AVR-5805MK2 | Serial Protocol - Page 13
C UP C DOWN C ** SW UP SW DOWN SW ** SL UP function MULTI ZONE-2 CHANNEL VOLUME UP/DOWN , direct change to **dB ---FRONT Lch **:38 to 62 by ASCII , 50 DOWN SBR ** SB UP SB DOWN **:38 to 62 by ASCII , 50=0dB ---SURROUND BACKch (SBch 1SP) Z2CVSBR 50 Z2CVSB UP Z2CVSB DOWN SB **
Denon AVR-5805MK2 | Serial Protocol - Page 14
COMMAND PARAMETER function Z2 PHONO MULTI ZONE-2 mode set , and select source | ---The name of PARAMETER is CDR/TAPE the same as that of the time of SI COMMAND. SOURCE UP MULTI ZONE-2 mode cancel MULTI ZONE-2 VOLUME UP/DOWN , direct change to ***dB DOWN ** **:00 to 99 by ASCII , 80=0dB
Denon AVR-5805MK2 | Serial Protocol - Page 15
COMMANDS are new. function SURROUND mode set All are received as "STANDARD" , the surround mode which changed return as EVENT. Both are received as "5CH/7CH STEREO" , the surround mode which changed return as EVENT. ---Invalid at AVR model ---Invalid at AVR model example Z2MSSTEREO Z2MSDOLBY
Denon AVR-5805MK2 | Serial Protocol - Page 16
MODE : PRO LOGIC DELAY UP DELAY DOWN DELAY *** The BOLD COMMANDS are new. function PARAMETER setting TONE DEFEAT ON/OFF SURROUND BACK SP MODE set ---MTRX ON = SURR.EX ON = DSCRT ON (@THX) (@ES DSCRT) CINEMA EQ. ON/OFF CINEMA / MUSIC / GAME / PL mode change (This parameter can change DOLBY PL2,PL2x
Denon AVR-5805MK2 | Serial Protocol - Page 17
COMMAND Z3 PARAMETER PHONO | CDR/TAPE SOURCE UP DOWN ** ON OFF function MULTI ZONE-3 mode set , and select source ---The name of PARAMETER is the same as that of the time of SI COMMAND. MULTI ZONE-3 mode cancel MULTI ZONE-3 VOLUME UP/DOWN , direct change to ***dB **:00 to 99 by ASCII , 80=0dB, 99
Denon AVR-5805MK2 | Serial Protocol - Page 18
MV ** MASTER VOLUME change , **:00 to 98 by ASCII MV80 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00 = -80dB 99 = ---(MIN) CV FL ** CHANNEL VOLUME change , **:00 to 62 by ASCII CVFL 50 FR ** C ** SW1 ** SW2 ** LFE ** SLA ** 62 = +12dB(MAX) 50 = 0dB 38 = -12dB(MIN) 00 = OFF
Denon AVR-5805MK2 | Serial Protocol - Page 19
EVENT PARAMETER MU ON OFF SI PHONO CD TUNER DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX CDR/TAPE DTU SV DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX SOURCE The BOLD COMMANDS are new. function OUTPUT MUTE ON/OFF change INPUT source change VIDEO INPUT source change
Denon AVR-5805MK2 | Serial Protocol - Page 20
PL2x CINEMA DOLBY PL2x MUSIC DOLBY PL2x GAME DOLBY DIGITAL DOLBY D EX DOLBY D +PL2x CINEMA DOLBY D +PL2x MUSIC DTS NEO:6 CINEMA DTS NEO:6 MUSIC DTS SURROUND SURROUND mode change function 20/25 29.Mar.06 example MSDIRECT MSPURE DIRECT MSSTEREO MSMULTI CH IN MSM CH IN+PL2X C
Denon AVR-5805MK2 | Serial Protocol - Page 21
MODE THX6.1 THX SURROUND EX WIDE SCREEN 5CH STEREO 7CH STEREO 9CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME MPEG2 AAC AAC+DOLBY EX AAC+PL2x CINEMA AAC+PL2x MUSIC The BOLD COMMANDS are new. function ---Invalid at AVR model ---Invalid
Denon AVR-5805MK2 | Serial Protocol - Page 22
new. 29.Mar.06 example Z2MSUSER1 Z2MSUSER2 Z2MSUSER3 PSROOM EQ:AUDYSSEY PSROOM EQ:FRONT PSROOM EQ:FLAT PSROOM EQ:MANUAL PSROOM EQ:OFF PSDELAY UP PSDELAY DOWN PSDELAY 200 TF105000 (1050.00kHz at AM) TPA1 (PRESET No."A1
Denon AVR-5805MK2 | Serial Protocol - Page 23
EVENT PARAMETER function example Z2CV FL ** MULTI ZONE-2 CHANNEL VOLUME change , Z2CVFL UP FR ** **:00,38 to 62 by ASCII Z2CVFL DOWN C ** 62 = +12dB(MAX) Z2CVFL 50 SW ** 50 = 0dB Z2CVFR
Denon AVR-5805MK2 | Serial Protocol - Page 24
CR> MSDOLBY PL2 G MSDOLBY PL2X C MSDOLBY PL2X M MSDOLBY PL2X G Z2MSDOLBY DIGITAL Z2MSDOLBY D EX Z2MSDTS NEO:6 Z2MSDTS SURROUND Z2MSDTS ES DSCRT6.1 Z2MSDTS ES MTRX6.1 Z2MSWIDE SCREEN Z2MS5CH STEREO Z2MS7CH STEREO Z2MSSUPER STADIUM Z2MSROCK ARENA
Denon AVR-5805MK2 | Serial Protocol - Page 25
29.Mar.06 EVENT Z2PS Z3 Z3MU PARAMETER DELAY UP DELAY DOWN DELAY *** PHONO | CDR/TAPE SOURCE ** ON OFF ON OFF function AUDIO DELAY change, ***:000 to 999 by ASCII ---AVR5805ɿ200=200msʢMAXʣ 100=100ms, 000=0ms MULTI ZONE-3 source change ---The name of PARAMETER is the same as that of the time of SI