Denon AVR-5805MK2 Serial Protocol - Page 3

Network Setup Of Avr-5805/avc-a1xv

Get Denon AVR-5805MK2 - AV Receiver PDF manuals and user guides
UPC - 081757507400
View all Denon AVR-5805MK2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

NETWORK SETUP of AVR-5805/AVC-A1XV >Procedure of Network Setup mode. (1)Push the POWER switch during STANDARD button and 9CH STEREO button press simultaneously. (2)Press SYSTEM SETUP button, then System Setup Menu appears on FL-display(and OSD) (3)Select Option Setup and select Network Setup. (4)Set parameters described below. "ON"---Use this setting when DHCP server is on the local network. "OFF"---Use this setting when DHCP server is not on the local network. When sets "OFF", please set IP address. When sets "ON", you can confirm the IP address that is set by server. When sets "OFF", please set Subnet Mask. When sets "ON", you can confirm the Subnet Mask that is set by server. Set the address of Gateway when Gateway is on the local network. Do not set this parameter when Gateway is not on the local network. Do not set this parameter. Do not set this parameter. Set this parameter "OFF". "OFF"---Use this setting when using the AVR-5805/AVC-A1XV connected in a network.  "ON"--- Use this setting when not using the AVR-5805/AVC-A1XV connected in a network. This setting is reducing the power consumption in the standby mode. 29.Mar.06 3/25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
29.Mar.06
3/25
NETWORK SETUP of AVR-5805/AVC-A1XV
>Procedure of Network Setup mode.
(1)Push the POWER switch during STANDARD button and 9CH STEREO button press simultaneously.
(2)Press SYSTEM SETUP button, then System Setup Menu appears on FL-display(and OSD)
(3)Select Option Setup and select Network Setup.
(4)Set parameters described below.
<DHCP>
"ON"---Use this setting when DHCP server is on the local network.
"OFF"---Use this setting when DHCP server is not on the local network.
<IP Address>
When <DHCP> sets "OFF”, please set IP address.
When <DHCP> sets "ON”, you can confirm the IP address that is set by server.
<Subnet Mask>
When <DHCP> sets "OFF”, please set Subnet Mask.
When <DHCP> sets "ON”, you can confirm the Subnet Mask that is set by server.
<Gateway>
Set the address of Gateway when Gateway is on the local network.
Do not set this parameter when Gateway is not on the local network.
<Primary DNS>
Do not set this parameter.
<Second DNS>
Do not set this parameter.
<Proxy>
Set this parameter "OFF".
<Network Option:Standby Mode Power Saving>
“OFF”---Use this setting when using the AVR-5805/AVC-A1XV connected in a network.
“ON”--- Use this setting when not using the AVR-5805/AVC-A1XV connected in a network.
This setting is reducing the power consumption in the standby mode.