Denon AVR4810CI Owners Manual - English - Page 39
Select Store
UPC - 883795001151
View all Denon AVR4810CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting Started Connections Settings Playback Multi-zone Remote Control Information Troubleshooting Specifications Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) STEP6 Store 7 Select "Store" and then press ENTER. Save the measuring results. b The save operation takes about 30 seconds to complete. NOTE During saving of measuring results, be sure not to turn off the power. • If there is a disparity between the results and the connection status, or if an error message is displayed, check the error message against the errors listed in the "Error Messages" section (vpage 37) and perform Audyssey Auto Setup again. • If the result still differs from the actual connection status after remeasurement or the error message still appears, it is possible that the speakers are not connected properly. Turn the AVR-4810CI off, check the speaker connections and repeat the measurement process from the beginning. Turn the AVR-4810CI off, check the speaker connections and repeat the measurement process from the beginning. • If you change a speaker position or orientation, perform Audyssey Auto Setup again to obtain optimal equalizer correction. 8 When the screen shown on the right appears, unplug the setup microphone from theAVR-4810CI SETUP MIC jack. 9 Select "Exit" and then press ENTER. n Exiting the GUI Menu Press MENU while the GUI menu is displayed. The GUI menu display disappears. NOTE After performing Audyssey Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey Auto Setup again. 36 Main remote control unit operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu