Denon DN-S3700 Owners Manual - Page 11

Front Panel q q Disc loading slot Insert CDs here. Insert the CD slowly, then release it. Rear Panel qw e rt y u i q Fader start terminal • Connect this terminal to a compatible mixer. The various fader commands (play, pause, cue, etc.) are received from the mixer. • Use a 3.5 mm stereo mini cord for connection. w Analog output terminals (LINE OUT) • This is unbalanced RCA output terminals. • Audio signals outputs. e Digital output terminal (DIGITAL OUT) • Digital data is available from these terminals. • Use 75 Ω/ohms pin cord for connection. • We recommend you use braided wire type shielded cable. NOTE The playback level after analog conversion is set to -6 dB below the usual level to avoid digital distortion. y USB B port • USB MIDI and HID commands are sent from the DN-S3700 to the computer. • USB MIDI and HID commands as well as USB AUDIO signals are received from the computer. u USB A port Only one mass storage device (USB memory, USB HDD, etc.) can be connected. b Not compatible with USB hubs i POWER ON/OFF button Push this button to turn power on and off. NOTE Do not turn off the power while a disc is loading or ejecting. Doing so could damage the CD mechanism and lead to malfunction. r PS/2 connector Terminal for connecting a PS/2 keyboard. t D-LINK connector Terminal for connecting another DN-S3700. Exchange of memo data, keyboard data and relay command information is performed with another DN-S3700. b Do not connect anything other than a DNS3700. b Use an RJ45 cross cable no longer than 3 meters for connection.  Getting Started Connections Playback Basic Operations Memo Function Utility Specifications