Denon DN-S3700 Owners Manual - Page 9
Part Names and Functions - vinyl
View all Denon DN-S3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Part Names and Functions Top Panel Note that there are many buttons working two different function selected by short time pushing or long pushing (1 second or more). The "⋅" mark indicates short time push function and "-" mark indicates long time push function. Q5 Q6 Q7 Q8 Q9 W0W1 W2 W3 Q4 W4 W5 Q3 W6 Q2 W7 Q1 W8 Q0 W9 o i E0 u E1 y t r E2 e w R2 q E3 R1 R0 E9 E8 E7 E6 E5 E4 q PLAY/PAUSE button (1 3) • This button will start or pause playback. • Push once to start playback, once again to pause playback, and once more to resume playback. w CUE button Pushing this button in play mode will force the file back to the position which playback started. While in search mode, it makes new Cue point. e •QUICK JUMP button, -FAST SEARCH button (6) (7) ⋅ QUICK JUMP: The play position jumps backward when the (6) button is pressed and immediately released. The play position jumps forward when the (7) button is pressed and immediately released. ⋅ FAST SEARCH: When one of these buttons is pressed and held in, the disc is fast-searched in the reverse (6) or forward (7) direction. r FILTER button One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected. t FLANGER button The depth and delay time can be selected. y ECHO/LOOP button The ECHO and LOOP functions can be selected. The feedback level and delay time can be selected. Looping for the delay time (ECHO LOOP) is possible by setting the feedback level to "MAX". u TAP button, -AUTO/INPUT BPM button ⋅ TAP: When you push this button repeatedly, the Auto mode turns off and starts measuring your Beats Per Minute (BPM) by tapping. ⋅ AUTO: When pushing the TAP button for 1 second, activates AUTO BPM mode. The measured BPM is displayed in the character section of the display. ⋅ BPM LOCK: When this button is pressed once while the Auto BPM counter is operating, the data measured by the Auto BPM counter is locked. ⋅ MANUAL INPUT: When the TAP button is pressed and held in for more than 2 seconds, the BPM input mode is set and the BPM value can be input directly with the EFFECTS knob. When the TAP button is pressed again, the BPM input mode is turned off. NOTE • If you select a new file, AUTO BPM mode turns on automatically. • BPM data can be saved to the MEMO function. i LOOP TRIM +/- button These buttons are used to Trim the length of the loop by "frames" during auto loop playback and adjust the BPM data. o Vinyl playback direction selector lever Use this select direction of Vinyl playback. ⋅ FWD: When the Vinyl disc is turned, the Vinyl playback sound is output from forward direction only. ⋅ BOTH: When the Vinyl disc is turned, the Vinyl playback sound is output from both the reverse and forward directions. Q0 EFFECTS knob Use this knob to set the internal effector's Dry/ Wet parameters, Length of the auto loop and BPM data. Q1 MEMO button, -PRESET button ⋅ MEMO: Various settings such as Cue Point, Hot Starts, Loops, BPM, Pitch and Key Adjust can be saved for later recall. ⋅ PRESET: When this button is pushed for more than 1 sec, the PRESET mode menu is displayed. The machine status must be in CUE, PAUSE or No Disc mode before entering the preset mode. Q2 AUTO LOOP SET button This button is used to set the Auto Beat Loop mode. When set ON (led lights up), buttons 1, 2, 3 can be used to create Auto Beat Loops. Q3 HOT START / AUTO LOOP buttons These are where the hot start points or the auto loop playback start points are stored. ⋅ HOT START: ⋅ The 1, 2, 3 buttons will light up dimly in green indicating the Hot Start points are available to store. Once a Hot Start is stored, the button lights up strongly in green. ⋅ AUTO LOOP: ⋅ The 1, 2, 3 buttons light up dimly in red during Auto Loop mode indicating the Auto Loop points are available to store. Once an Auto Loop is stored, the button lights up strongly in red. Getting Started Connections Playback Basic Operations Memo Function Utility Specifications