Denon Dn-c620 Operating Instructions

Denon Dn-c620 - Dnc620 Professional Broadcast Cd Player Manual

Denon Dn-c620 manual content summary:

  • Denon Dn-c620 | Operating Instructions - Page 1
    PROFESSIONAL CD PLAYER DN-C620 OPERATING INSTRUCTIONS
  • Denon Dn-c620 | Operating Instructions - Page 2
  • Denon Dn-c620 | Operating Instructions - Page 3
    The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE: This CD Player uses the semiconductor laser. To allow you to enjoy music at a stable
  • Denon Dn-c620 | Operating Instructions - Page 4
    use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing by an instructed person or the use of ready-made
  • Denon Dn-c620 | Operating Instructions - Page 5
    this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. Do not expose batteries to excessive heat such as sunshine, fire or the like. VORSICHT: (Deutsch
  • Denon Dn-c620 | Operating Instructions - Page 6
    • Se till att främmande föremål inte tränger in i apparaten. • Não deixe que entrem objectos estranhos para o aparelho. • Unplug the power cord when not using the set for long periods of time. • Wenn das Gerät eine längere Zeit nicht verwendet werden soll, trennen Sie das Netzkabel vom Netzstecker
  • Denon Dn-c620 | Operating Instructions - Page 7
    disposal. • The apparatus shall not be exposed to dripping or splashing for use. • No objects filled with liquids, such as vases, shall be placed OSYNLIG LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
  • Denon Dn-c620 | Operating Instructions - Page 8
    L'apparecchio si potrebbe danneggiare se si cerca di farlo. Non utilizzare questi CD. • Use discos compactos con la marca . En este equipo no es posible reproducir CDs con formas especiales (CDs con forma de corazón, CDs octagonales, etc.). Si intenta hacerlo, el equipo podrá resultar dañado. No
  • Denon Dn-c620 | Operating Instructions - Page 9
    abcdefghijklmnopqrstuvwxyz • Chiffres 0123456789 • Symboles SPACE • Quest'unità può visualizzare dei testi sul display durante la riproduzione di CD che contengono dei testi in inglese. Il disco CD con testi include il marchio mostrato qui a destra. NOTA: • Quest'unità è in grado di fornire una
  • Denon Dn-c620 | Operating Instructions - Page 10
    • Symboler SPACE • Este leitor pode mostrar informações de texto no visor durante a reprodução de discos CD Text que contenham informações de texto na categoria de Inglês. O disco CD Text apresenta o símbolo mostrado acima. NOTA: • Este leitor permite a visualização de texto com os tipos de
  • Denon Dn-c620 | Operating Instructions - Page 11
    are included in addition to the main unit: q Remote Control Unit (RC-1061 1 w Size "AAA" batteries ...2 e Audio Cord (Stereo)...1 r AC Power Cord ...1 (Europe models) ...2 t Operating Instructions...1 y CD-ROM...1 u Warranty card ...1 A NOTE ABOUT RECYCLING: This product's packaging materials
  • Denon Dn-c620 | Operating Instructions - Page 12
    1U rack space ■ IR Remote Control (Remote controller RC-1061 included) ■ External Remote Control Serial control (RS232C) Parallel control RC In Control (IR FLASH) 2 PART NAMES AND FUNCTIONS (1) Front panel 2 4 POWER ON/OFF 0 10 LEVEL PHONES CD PLAYER DN-C620 EJECT MENU/STORE DISPLAY SHIFT
  • Denon Dn-c620 | Operating Instructions - Page 13
    5 for details. u Remote control sensor i SHIFT button when held down. • Use this button while pressing the SHIFT button to select the index (Audio CDs) or directory (music pressed during manual search, the CUE mode is set at that position. !9 2 / ; /END MON button and indicator (Green) • Use this
  • Denon Dn-c620 | Operating Instructions - Page 14
    AES/EBU LEVEL ANALOG OUTPUT LEVEL R R DIGITAL OUTPUT RS232C xz cv b n PARALLEL REMOTE IR FLASH m, . z ANALOG (Balanced) OUTPUT • These are active balanced outputs using XLR type connections. The CD's audio playback signals are output from these connectors. • Pin layout : 1. GND / 2. Hot
  • Denon Dn-c620 | Operating Instructions - Page 15
    ENGLISH (3) Display Specific Icons and Character displays inform you of the current operating status and menu items of the device. 1. GENERAL INFORMATION [Basic CD Operation] "TOTAL" illuminates to indicate that the time displayed is the TOTAL time of the track or file. "TOTAL" can also be lit
  • Denon Dn-c620 | Operating Instructions - Page 16
    character display. Track number / Total number of Tracks Playing time (hour, minute, second and frame number) Displays file information, recorded time, and the other information (4) Remote control unit (RC-1061) q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2 @3 @4 @5 @6 @7 6
  • Denon Dn-c620 | Operating Instructions - Page 17
    the End Monitor funciton. i UTILITY button This button is invalid for the DN-C620. o 3 / 4 / 1 / 2 buttons Use these for menu selection and 1 / 2 for track selection. !0 INDEX+/- buttons Press this to select the index (Audio CDs) or directory (Audio data discs). !1 STOP button Press this to stop the
  • Denon Dn-c620 | Operating Instructions - Page 18
    control unit in a range which of about 5 meters from the player's remote sensor and over an angle up to 30 degrees to the left and 30 degrees to the right of the position directly in front. 2. Load the two new size "AAA" batteries inside the battery compartment while taking care to align their
  • Denon Dn-c620 | Operating Instructions - Page 19
    DN-C620 is of 1U size, allowing it to be mounted in EIA standard 19-inch racks. When mounting the DN-C620 in a rack, use guide rails or shelf boards, etc., on the rack side to prevent weight from being applied to the front of the DN-C620. The fittings alone cannot support the weight of the DN-C620
  • Denon Dn-c620 | Operating Instructions - Page 20
    CD output jacks to the amplifier CD or AUX input jacks. • Connect one end of a straight-through RS-232 serial cable into Communication Port on the back of the DN-C620 to "VARIABLE" and adjust by remote control. D-Sub Female 25-Pin to connect directly to a computer using a straight-through cable. RC
  • Denon Dn-c620 | Operating Instructions - Page 21
    DN-C620. The meanings of the messages are explained below. No Disc Eject Locked Message Meaning No disc is inserted. Unit is playing and Eject lock is on in the preset menu. CAUTIONS: • Do not push in the disc manually when the power is off as this may cause malfunction and damage the CD player
  • Denon Dn-c620 | Operating Instructions - Page 22
    button on the remote control unit during playback. (Button Flashes when in PAUSE mode) POWER ON/OFF 0 10 LEVEL PHONES CD PLAYER DN-C620 EJECT PITCH A-B PLAYMODE use. (See Page 25.) (2) Starting Playback 1. Press the 2 / ; /END MON button on the front panel or the 2 / ; button on the remote
  • Denon Dn-c620 | Operating Instructions - Page 23
    SKIP BACK CUE END MON PUSH ENTER PITCH (8) Audible quick search • Using this function, you can search for a desired point quickly within a track pause mode is cancelled at that point with the sound being output. Manual search forward 1. Press the SEARCH (6) button during playback. PITCH A-B
  • Denon Dn-c620 | Operating Instructions - Page 24
    or IR control was pressed. If the index skip function is operated for a CD with no indexes recorded, the "No Index" message appears on the main the numeric buttons (0 to 9) on the remote control unit. To select track number 10 or above, use the numeric buttons to select the higher digit first
  • Denon Dn-c620 | Operating Instructions - Page 25
    CD light on the display and the single track repeat mode is set. 3. Use the select knob to select the track to be played repeatedly. 4. Press the MON button on the front panel or the 2 / ; button on the remote control unit. PITCH A-B PLAYMODE REPEAT TEXT - INDEX/DIR + CANCEL SKIP BACK
  • Denon Dn-c620 | Operating Instructions - Page 26
    button on the remote control unit to select the track. • Skip to the next desired track and press the ENTER button again. • Repeat steps 2 and 3 to program the tracks in the desired order. 4. Press the PROGRAM button to exit the program input mode. • "PGM" indicator lights, and the DN-C620 is ready
  • Denon Dn-c620 | Operating Instructions - Page 27
    PROGRAM button to exit the program edit mode. 2. Press the UP or DOWN button on the remote control unit to select the program number you want to edit. • "PGM" indicator lights, and the DN-C620 is ready to play your program. Playing the programs 1. Press the PLAY/PAUSE button. PITCH A-B PLAYMODE
  • Denon Dn-c620 | Operating Instructions - Page 28
    BACK button on the unit or SKIP BACK button on the remote control unit is pressed during playback, play will skip back by DN-C620 plays back the last track of the current disc. To use this feature, press the 2/;/END MON button while pressing the SHIFT button during in CUE mode on the device or remote
  • Denon Dn-c620 | Operating Instructions - Page 29
    on the display and the continuous mode is set. 2. Use the select knob to select the track to be played. front panel or the 2 / ; button on the remote control unit. PITCH A-B PLAYMODE REPEAT TEXT - INDEX the last track ends, playback stops. The DN-C620 returns to stop mode. 3. DEVICE OPERATION
  • Denon Dn-c620 | Operating Instructions - Page 30
    Stop" is displayed on the display and the Single Stop mode is set. 2. Use the select knob to select the track to be played. 3. Press the 2 / ; /END MON button on the front panel or the 2 / ; button on the remote control unit. PITCH A-B PLAYMODE REPEAT TEXT - INDEX/DIR + CANCEL SKIP BACK CUE
  • Denon Dn-c620 | Operating Instructions - Page 31
    data discs Compact Disc Recordable (CD-R) Compact Disc ReWritable (CD-RW) NOTE: • The DN-C620 supports following file system for the data discs. ISO9660 Level1 and Level2, Joliet, UDF version 1.50 and 2.00 • The DN-C620 cannot read unfinalized CD-R disc. • The DN-C620 can only read the 1st
  • Denon Dn-c620 | Operating Instructions - Page 32
    audio file The following functions are not supported when the DN-C620 encounters discs recorded with these types of audio operations, but directory-CCC is excluded from operations. If directory-AAA is selected, CD operations such as program playback are effective only to audio files of directory-AAA
  • Denon Dn-c620 | Operating Instructions - Page 33
    ENGLISH ■ Text information When a data disc with MP3 files, is inserted into the DN-C620, in addition to above information various kind of text information are displayed on the 13-digit alphanumeric part of the display unit. This information is
  • Denon Dn-c620 | Operating Instructions - Page 34
    on the display. 3. Press the 2 / ; / END MON button. (2) Advanced music files playback The following "Advanced CD playback" functions are possible with audio files on a disc in the same way as a standard CD-DA disc. See page 16 for detail of an operation. ■ Single track repeat ■ All track repeat
  • Denon Dn-c620 | Operating Instructions - Page 35
    unit in stop mode, press the MENU/STORE button. [ Using the remote control unit ] 1. With the unit in stop mode, press the MENU/STORE button. The last active preset item appears on the display. 0 10 LEVEL PHONES CD PLAYER DN-C620 EJECT MENU/STORE DISPLAY SHIFT LOCK The last active preset
  • Denon Dn-c620 | Operating Instructions - Page 36
    ENGLISH 3. DEVICE OPERATION (2) Table of Preset Items and Default settings No (Order) Display (Preset item) 1. Power On 2. Start Mode 3. Cue Mode 4. Auto Cue 5. Fade In 6. Fade Out 7. Skip Back 8. End Monitor 9. EndOfMessage 10. NextTrReserve 11. Fader Start 12. Index
  • Denon Dn-c620 | Operating Instructions - Page 37
    currently playing file Unit cues to the next track 4. Auto Cue (Auto Cue) This feature allows you to decide at what level of music the DN-C620's Auto Cue feature will detect. Set value Off (default) -48dB -42dB -36dB Auto Cue Off On On On Processing Detecting level is less than --- -48dB
  • Denon Dn-c620 | Operating Instructions - Page 38
    (Skip Back) This feature allows you to set the amount of time that the DN-C620 will instantly replay when SKIP BACK is pressed on the unit or IR control. Set value you to set the amount of time at the end of the track that the DN-C620 will play when the END MON button is pressed on the unit or IR
  • Denon Dn-c620 | Operating Instructions - Page 39
    the End of Message will be displayed. When less than the user selected time is left at the end of the currently playing track /60seconds 10. Next track reserve (NextTrReserve) This feature allows you to decide what the DN-C620 will do at the end of a track. Play mode setting is "Single Stop" Set
  • Denon Dn-c620 | Operating Instructions - Page 40
    allows you to decide how the DN-C620 behaves when the Fader Start pins are short-circuited. Set value Play Play-Pause (default) Processing Unit starts playback when the remote fader pins (9-23) are short circuited mode if no servo functions occur for longer than the user-designated time 30
  • Denon Dn-c620 | Operating Instructions - Page 41
    the jog wheel until "FW version" appear in the display. 3. Press the jog wheel. The Display switches to the firmware version. 4. Press the STOP/CANCEL button to cancel. [ Using the remote control unit ] 1. While in stop mode, press the UTILITY button. 2. Press the 3 button or the 4 button until
  • Denon Dn-c620 | Operating Instructions - Page 42
    functions of the DN-C620 externally. • The DN-C620 automatically transmits status data when status is changed. • The DN-C620 will respond to data length of 7 bytes or more. ASCII codes from 0×00 to 0×7F are used to transmit serial data. For this reason, the ASCII codes are converted into HEX data
  • Denon Dn-c620 | Operating Instructions - Page 43
    (4) Table of Control command codes "@02000"+CR "@02001"+CR "@02002"+CR "@02003"+CR "@02004"+CR "@02005"+CR "@02006"+CR "@02007"+CR "@02008"+CR "@02009"+CR "@02011"+CR "@02012"+CR "@020PW"+CR "@02016"+CR "@02017"+CR "@02028ON"+CR "@02028OF"+CR "@02029ON"+CR "@02029OF"+CR "@02032"+CR "@02033"+CR "@
  • Denon Dn-c620 | Operating Instructions - Page 44
    ENGLISH 4. CONTROL FEATURES Code "@02050"+CR "@02052"+CR "@02053"+CR "@02054"+CR "@02059"+CR "@020CU"+CR "@020EM"+CR "@020SB"+CR "@020KL"+CR "@020KU"+CR "@020DJXXXXXXXXXXXX"+CR "@0PMSS"+CR "@0PMSN"+CR "@0PMSR"+CR "@0FMCT"+CR "@0PMRD"+CR "@0POPL"+CR "@0POST"+CR "@0SAPL"+CR "@0SACU"+CR "@0SAST"+CR "@
  • Denon Dn-c620 | Operating Instructions - Page 45
    ENGLISH "@0EDXX"+CR "@0NRXX"+CR "@0FDPL"+CR "@0FDPU"+CR "@0ITI2"+CR "@0ITI3"+CR "@0MOXX"+CR "@0ASXXXX"+CR "@0ELXX"+CR "@0DEFL"+CR Code Command EOM - OF:OFF, 05:5sec, 10:10sec, 15:15sec, 20:20sec, 30:30sec, 60:60sec Next Reserve - 00:ON, 01:OFF Fader Start -Play Fader Start -PlayPause Index Tally
  • Denon Dn-c620 | Operating Instructions - Page 46
    the Status Information to the host. When the DN-C620 changes status, the DN-C620 automatically sends Status Information to the host. Mode Power Mode Disc Status Time Mode Track Number 36 Request Code "@0?PW"+CR "@0?CD"+CR "@0?ST"+CR Stop Play "@0?TM"+CR Other Time Mode "@0?TR"+CR Status
  • Denon Dn-c620 | Operating Instructions - Page 47
    Mode Display Time Volume Pitch Text Title Text Artist Text Album POS Code ISRC Code Play Mode Request Code "@0?TI"+CR "@0?VM"+CR "@0?PT"+CR "@0?T1"+CR "@0?T2"+CR "@0?T3"+CR "@0?C1"+CR "@0?C1"+CR "@0?PM"+CR Power On Start Mode Cue Mode Auto Cue Fade In Fade Out Skip Back End Mon End Of Message ✽1:
  • Denon Dn-c620 | Operating Instructions - Page 48
    ENGLISH 4. CONTROL FEATURES Mode Next Tr Reserve Fader Start Index Tally Mono Sleep Eject Lock Digital FS Request Code "@0?NR"+CR "@0?FD"+CR "@0?IT"+CR "@0?MO"+CR "@0?AS"+CR "@0?EL"+CR "@0?DF"+CR Status On Off Play PlayPause Index2 Index3 On Off Time On Off Fs "@0NR00"+CR "@0NR01"+CR "@0FDPL"+
  • Denon Dn-c620 | Operating Instructions - Page 49
    GPIO (Parallel) CONTROL Use this to control the DN-C620 with dry contact circuit connections. (1) Interface Condition • Applicable 3 22 23 16 4 EOM INDEX2/INDEX3 17 22 24 22 NOTE: • The rating of REMOTE connector pin 22 (TALLY POWER SUPPLY) is +5 VDC, 100 mA maximum. Avoid currents in
  • Denon Dn-c620 | Operating Instructions - Page 50
    control jack while other sets are connected to the remote control box. (2) Operation with Parallel Connections A number of DN-C620 units can be simultaneously operated in parallel with one button. Operation with parallel connections can be used with a maximum of 5 units. Connection of 6 or more
  • Denon Dn-c620 | Operating Instructions - Page 51
    TROUBLESHOOTING Make sure of the followings before you consider as any malfunctions : 1. Are all the connections correct? 2. Are all system components being operated correctly in accordance with the operating instructions Remote supported file extension and is a format that the DN-C620 supports. 41
  • Denon Dn-c620 | Operating Instructions - Page 52
    : 44.1 kHz at Normal Pitch 16-bit Linear ■ REMOTE CONTROL Serial remote : Parallel remote : IR control input : IR FLASH : RS232C, D-Sub ■ DIMENSIONS 434mm (17.1") POWER ON/OFF 0 10 LEVEL PHONES CD PLAYER DN-C620 EJECT 482.6mm (19.0") MENU/STORE DISPLAY SHIFT LOCK PITCH A-B
  • Denon Dn-c620 | Operating Instructions - Page 53
  • Denon Dn-c620 | Operating Instructions - Page 54
    Printed in Japan D&M Holdings Inc. PROFESSIONAL BUSINESS COMPANY 08/2008 541110137003P ecmf-g
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

PROFESSIONAL CD PLAYER
DN-C620
OPERATING INSTRUCTIONS