Dymo LabelManager® 260P User Guide 1 - Page 6
Inserting the Battery Pack, See - label maker
View all Dymo LabelManager® 260P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Inserting the Battery Pack The battery pack included with your label maker comes partially charged. You do not need to charge the battery pack before using your label maker for the first time. To insert the battery pack Figure 2 1 Slide the battery compartment cover away from the label maker. See Figure 2. 2 Insert the battery pack into the battery compartment. 3 Replace the battery compartment cover. NOTE Remove the battery pack if the label maker will not be used for a long period of time. Recharging the Battery Pack A power adapter is included with your label maker for recharging the battery pack. NOTE The power adapter is only used for recharging the battery pack; the power adapter cannot be used to power the label maker. To recharge the battery pack 1 Plug the power adapter into the power connector on the top of the label maker. 2 Plug the other end of the power adapter into a power outlet. 6