Dynex DX-CRD12 User Guide - Page 5
Card reader components
UPC - 600603109041
View all Dynex DX-CRD12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Card reader components Feature LED CF/MD slot 5 Description Indicates when a slot is reading from or writing to a card. LED off-Your card reader is not being used. LED on-A card is inserted in one of the slots. LED flashing-Data is being transferred to or from a card and the hard drive or another card. Insert Compact Flash (type I/II), IBM Microdrive, or Magicstor cards into this slot. MS/MS-DUO slot Note: The arrow shows the direction you insert the card into the slot. Insert Sony memory sticks or MS-Pro or MS-DUO memory cards into this slot. T-Flash slot Note: The arrow shows the direction you insert the card into the slot. Insert Transflash or Micro SD memory cards into this slot. No adapter is required. Note: The T-flash slot and signal bus are shared with the SD/MMC slot which means that you cannot use both slots at the same time. Note: The arrow shows the direction you insert the card into the slot.