EMC AX100 Release Notes - Page 37

Installation Unless you specify another folder, the CLARiiON VSS Provider and Navisphere CLI will be installed in the following default locations: C:\Program Files\EMC\CLARiiON VSS Provider C:\Program Files\EMC\Navisphere CLI 4. Remove the CD from the CD-ROM drive. 5. Create a file called ClariionSPAddress in the same directory where Navisphere CLI was installed, for example, C:\Program Files\EMC\Navisphere CLI\ClariionSPAddress. The ClariionSPAddress file should contain the IP addresses of each CLARiiON SP on a separate line. For instance, if you are performing VSS operations on virtual disks contained on two CLARiiON systems and these systems are connected to the server, their IP addresses are listed as follows: Storage System 1 SPA = x.x.x.110 Storage System 1 SPB = x.x.x.111 Storage System 2 SPA = x.x.x.112 Storage System 2 SPB = x.x.x.113 Then the contents of the ClariionSPAddress file would be: x.x.x.110 x.x.x.111 x.x.x.112 x.x.x.113 To remove the CLARiiON VSS Provider If you want to remove the CLARiiON VSS Provider, select Settings > Control Panel > Add or Remove Programs > CLARiiON VSS Provider and click Remove. EMC AX100-Series Integrated Management Software Release Notes 37