EMC AX100 Release Notes - Page 43

Installation 3. Verify that the removal was successful (refer to "Verifying the silent installation or removal" on page 48) before running the command on all the other attached Windows servers. 4. If the removal was successful, repeat steps 1 and 2 on all remaining attached Windows servers. Installing the Navisphere Server Utility We recommend that you install the Navisphere Server Utility on all attached Windows servers. Important We do not recommend that you install the Navisphere Server Utility using the command line interface unless you are an advanced user. If you are not, we recommend that you install the utility as described in the installation guide for your configuration. To perform a silent installation for the Server Utility follow the procedure below. Preparing for the installation 1. Log in to the Windows server as Administrator or someone who has administrative privileges. 2. If the server utility is already installed, you must remove it by using Windows Add/Remove program. The installation program does not let you overwrite an existing utility. Important To perform a silent removal, the same version of the utility must be running on each attached Windows server. 3. Insert the AX-Series Server Support CD in the server's drive. 4. From the CD-ROM directory, navigate to the windows > AX100_server_utility folder. 5. Select the Install_Navisphere_Server_Utility(AX).exe file. 6. Click Next in the Navisphere Server Utility AX - Welcome dialog box. 7. Click Browse to select the folder where the files should be unpacked; then click Continue. The Navisphere Server Utility Setup.exe file and all supporting files are unpacked to the specified folder. EMC AX100-Series Integrated Management Software Release Notes 43