Edimax BR-6258n User Manual - Page 74
GHz B+G+N: 2.4GHz Band, Allows
View all Edimax BR-6258n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2.4 GHz (G): 2.4GHz band, only allows 802.11g wireless network client to connect this router (maximum transfer rate 11Mbps). Channel Number MAC address 1 Set Security 2.4 GHz (B+G+N): 2.4GHz Band, Allows 802.11b, 802.11g, and 802.11N wireless clients. It's recommends to select this band to maximize compatibility. Select the channel number you wish to use; both access points must use the same channel. Input the MAC address of another wireless access point (the one you wish to connect). Click 'Set Security' button to set security functions of this wireless connection to improve security. Please refer to chapter 3‐2‐1‐7 for detailed instructions. When you finished with the settings in this page, you can click 'Apply' button to save changes you made in this page, or you can click 'Cancel' to discard changes. After you click 'Apply' button, you'll see the following messages: Please click 'Apply' to save changes you made and restart the broadband router, this requires about 30 seconds and the broadband router will stop responding (this is normal and is not malfunction). You can reconnect to this broadband router and continue on other settings later. You can click 'Continue' to continue on other settings without restart the broadband router, however, the changes you made will not take effect before you restart the broadband router. 73