Edimax EW-7428HCn Quick Install Guide - Page 4

Getting Started

Get Edimax EW-7428HCn PDF manuals and user guides View all Edimax EW-7428HCn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

GETTING STARTED 1. Carefully remove the back panel cover by twisting it counter-clockwise. This enables easier access to the LAN port and the power adapter. 2. Plug one end of an Ethernet cable into the device's Ethernet port, plug the other end into your computer's Ethernet port. 3. Plug the power adapter into a wall socket, then connect it to the 5V DC power port. 4. The device will begin to initialize. After 30 seconds, the power LED will turn on, which indicates the device has completed its initialization. Note: Make sure that your computer is set as a DHCP client. If you are unsure, please see the user manual on the enclosed CD for more information. 5. Enclosed in the product box is an Access Key card, containing a URL to access the device's browser-based configuration interface, similar to the example below. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
3
GETTING STARTED
1.
Carefully remove the back panel cover by twisting it counter-clockwise.
This enables easier access to the LAN port and the power adapter.
2.
Plug one end of an Ethernet cable into the device
’
s Ethernet port, plug the
other end into your computer
’
s Ethernet port.
3.
Plug the power adapter into a wall socket, then connect it to the 5V DC
power port.
4.
The device will begin to initialize. After 30 seconds, the power LED will turn
on, which indicates the device has completed its initialization.
Note
: Make sure that your computer is set as a
DHCP client. If you are unsure, please see the user
manual on the enclosed CD for more information.
5.
Enclosed in the product box is an Access Key card, containing a URL to
access the device
’
s browser-based configuration interface, similar to the
example below.