Edimax EW-7438APn Manual - Page 27
AP Isolation, III-3-2. AP Bridge-Point to Point, Channel Number
View all Edimax EW-7438APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Band AP Isolation instant responses. This improves the performance of such network applications. Select the wireless band you wish to use for the access point: 802.11b, 802.11g, 802.11n or selected combinations of each. Only wireless clients of the same band(s) as you select will be able to connect. When "Enabled", wireless clients will be able to access the Internet, but will not be able to communicate with each other. This applies to clients connected to the MAIN ESSID only. III-3-2. AP Bridge-Point to Point In AP bridge-point to point mode, the access point connects to another wireless access point in the same mode, and all connected Ethernet clients of both devices are connected together. This allows two physically isolated networks to communicate with each other. When using this mode, the access point will not accept regular clients. Band AP Isolation Channel Number 27 Select the wireless band you wish to use for the access point: 802.11b, 802.11g, 802.11n or selected combinations of each. Only access points of the same band or bands as you select will be able to connect. When "Enabled", wireless clients will be able to access the Internet, but will not be able to communicate with each other. This applies to clients connected to the MAIN ESSID only. Select a channel number for the access point.