Edimax EW-7612PIn Manual - Page 26

ASCII / PASSPHRASE drop-down menu. This setting must be identical with the setting of wireless access point you with to connect. When the encryption type is 'WEP', it's required to input a set of 'passphrase' to connect to wireless access point. Check 'ASCII' or 'PASSPHRASE' depends on the security setting of access point, and input it in the box; if you select 'PASSPHRASE' you also need to select the length of the key. Key index Network key / Confirm network key EAP TYPE / Tunnel / Provision Mode Username / Identity / Domain / Password Certificate PAC The passphrase must be identical with the setting of wireless access point you with to connect. Select WEP key index. For most of access points you can select '1', but please refer to the setting of the access point. When the encryption type is 'WPA' or 'WPA2-PSK', it's required to input a set of 'passphrase' to connect to wireless access point. Please input the same passphrase in two boxes for confirmation. When authentication type is any of 802.1X, you have to select EAP type, tunnel, and provision mode from dropdown menu. This setting must be identical with your 802.1x authentication server. Please input 802.1x related authentication information here. If certification is required to authenticate with 802.1x authentication server, please select a local certificate from dropdown list. Check this box and PAC (Privilege Access Certificate) will be automatically selected. When all required parameters are set, click 'OK' to create and save a new profile. 23