Home » Edimax Manuals » Webcams » Edimax IC-9000 » Manual Viewer

Edimax IC-9000 Manual

View all Edimax IC-9000 manuals

Add to My Manuals
Save this manual to your list of manuals

Edimax IC-9000 manual content summary:

Edimax IC-9000 | Manual - Page 1
1
Edimax IC-9000 | Manual - Page 2
10 1-3 Highlights of the DDNS-Free Outdoor IP Camera 11 1-4 Familiar with the IC-9000 12 1-5 Install the IC-9000 13 1-5-1 Hardware Installation 13 1-5-2 Software Installation 14 Chapter II Start Using the DDNS-Free Outdoor IP Camera 15 2-1 Use CamView Software to See the Video 15
Edimax IC-9000 | Manual - Page 3
Zoom Out 77 Chapter VI Start Surveillance Software 78 6-1 Installing IP Camera Surveillance Software 78 6-2 Using IP camera Surveillance Software 82 6-3 Configure IP camera Surveillance Software 85 6-3-1 Configure Cameras 85 6-3-1-1 'Camera' tab 86 6-3-1-2 Schedule Recording 88 6-3-1-3 Audio
Edimax IC-9000 | Manual - Page 4
-in / Zoom-out 106 6-8 PTZ...107 6-9 Snapshot 108 6-10 Recording 108 6-11 Video Playback 109 Appendix A. Features 110 Appendix B. Specifications 111 Appendix C. Maximum Allowed Video Users 113 Appendix D. Performance Information 114 Appendix F. 3GPP/ISMA operation 115 Appendix F. 3GPP/ISMA
Edimax IC-9000 | Manual - Page 5
entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company User Manual on the CD-ROM. The software and specifications are subject to change without notice. Please visit our web site www.edimax.com for
Edimax IC-9000 | Manual - Page 6
you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this modem, please contact your dealer for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure
Edimax IC-9000 | Manual - Page 7
an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between
Edimax IC-9000 | Manual - Page 8
EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of a class B product. In a domestic environment, this product may cause radio interface, in which case the user may be required to make adequate measures.
Edimax IC-9000 | Manual - Page 9
, please ask your dealer of purchase for a new package. Packaging List Item Name No. 1 DDNS-Free Outdoor IP Camera 2 Power Adapter 12V 1.0A 3 Ethernet Cable 4 Installation Guide 5 CD ROM (Including User Guide & Utility) 6 Account Card 7 Accessory Bag (Anchors & Screws) Quantity
Edimax IC-9000 | Manual - Page 10
1-2 System Requirements CPU: Pentium 4 (or equivalent AMD) 1.0 GHz or above, 1 GB RAM OS: Windows XP/Vista/Win 7 Browser: IE 7 or above 10
Edimax IC-9000 | Manual - Page 11
1-3 Highlights of the DDNS-Free Outdoor IP Camera Thanks again for choosing this DDNS-Free Outdoor IP Camera. The IC-9000 is designed with the User-friendly concept. You can install the IP Camera easily on your home network and then access the IP Camera anywhere in the world with the video
Edimax IC-9000 | Manual - Page 12
Familiar with the IC-9000 The IC-9000 is designed to be very easy to install and use. First, let's see the major components of the IP CAM products. Item No. Name Description 1 Ethernet Indication LED (blue) Indicates if the Ethernet link is ok and packet traffic is sending/receiving. When the
Edimax IC-9000 | Manual - Page 13
the IC-9000: 1. Connect the IP CAM to the home/office network. 2. Install the CamView software on the notebook/PC. 3. Key in the ID/password of the IP CAM(from the ID/Password card) on the CamView, and then you can see the video. 1-5-1 Hardware Installation Please follow the following instructions
Edimax IC-9000 | Manual - Page 14
Installation 1. Before installing CamView software on your PC or laptop, please make sure you have correctly installed the IC-9000. It's highly recommended to close other Windows applications to prevent the installation from any possbile confliction. 2. Please insert the installation CD into
Edimax IC-9000 | Manual - Page 15
Chapter II Start Using the DDNS-Free Outdoor IP Camera 2-1 Use CamView Software to See the Video Following figure is the running window of the CamView program. If the computer and the IC-9000 is connected to the same network, the ID of the IC-9000 will be displayed in the "Auto Search" list. If you
Edimax IC-9000 | Manual - Page 16
the video from the CamView software in the local network, it's very easy to see the video in a remote location. All you need to do is add a camera item in the "CameraList" 16folder of the CamView software, key in the ID and Password of the IC-9000 (from the ID/Password card). And then double click
Edimax IC-9000 | Manual - Page 17
web configuration page by directly key-in the IP address of the IP CAM or right-click the searched IP CAM in the "Auto Search"17list of the CamView software and click the "Web Configure" to open the login window of the IP CAM. The default login account is "admin", leave the Password field empty. 17
Edimax IC-9000 | Manual - Page 18
You can see the model name/firmware version, IP CAM ID, registration status, network type and current video settings (bandwidth & resolution) in this page. The IP CAM can be viewed remotely by the CamView software only when the IP CAM is registered. If this IP CAM is not registered, please check the
Edimax IC-9000 | Manual - Page 19
3-2 Video Display This display page allows you to view the video display of the IP camera. For the first time use of this display on a computer, an activeX component will be automatically downloaded into the browser. This could take some time,
Edimax IC-9000 | Manual - Page 20
plugged in again, the IP CAM will obtain a new IP address immediately. If the network environment does not support DHCP function, you will need to set the network settings of the IP CAM manually. Please fill all the fields including "IP address"20, "Subnet mask", "Default gateway"20and "DNS server
Edimax IC-9000 | Manual - Page 21
21
Edimax IC-9000 | Manual - Page 22
connection. Please be noticed that the DHCP or static IP settings in the "Network"22page can work together with the PPPoE connection. Only that the PPPoE has higher priority, so, if the PPPoE is working, the IP CAM will use PPPoE to connect to the Internet. The default setting is "Disable PPPoE". 22
Edimax IC-9000 | Manual - Page 23
(play video) - This is the password needed for viewing the video from the CamView software. Together with the IP CAM ID, you can view the video of this IP CAM anywhere in the world through the Internet. 2. Internet speed - This is the Internet bandwidth of your network environment. Higher value will
Edimax IC-9000 | Manual - Page 24
. The default setting is "Outdoor video", in most cases, this is also ok for indoor usage. Under some special cases, there could be some strip lines on the video display when the IP camera is taking indoor video. In this situation, change the setting to "Indoor video" will solve the problem. Please
Edimax IC-9000 | Manual - Page 25
to input this url in different way, detailed information could be found in the user manual of different 3G mobiles. Please be noticed that usually public IP address is needed for the IP camera, so that the 3G mobile could access the IP camera's video. The default setting is "Enable 3GPP/RTSP". 25
Edimax IC-9000 | Manual - Page 26
dark. There is a light sensor on the IP cam that is doing this light detection. 2. Scheduled time of night mode: the IP Cam can also be scheduled to turn on the IR LEDs in a time range of each day. 3. Manual night mode control: the IP Cam can be manually forced to night mode( IR LEDs on ) or
Edimax IC-9000 | Manual - Page 27
D/I alarm is constantly on, the IP camera will keep sending out email/ftp CAM will send out an email message with the jpeg picture attached to the specified email account. 4. Email recipient - this is the email address to receive password - this is the account to use the SMTP server to transfer the
Edimax IC-9000 | Manual - Page 28
the IP CAM will send out a jpeg picture file to the specified ftp account. 9. FTP server - this is the FTP server address to receive the jpeg file. 10. FTP username/password - this is the username/password to connected video viewing users will be disconnected. The default setting is "Disable". 28
Edimax IC-9000 | Manual - Page 29
3-9 DI/DO Settings The IP camera provides DI alarm detection function. The related settings are explained below: 1. Digital input - can select the normal status of the digital input as either open
Edimax IC-9000 | Manual - Page 30
in the local area network or in the public internet), the IP camera can connect to it by the "NAS IP address". 4. The "Shared folder name" is the folder in the NAS device that will record the video files of the IP camera. 5. The "NAS access account" and "NAS access password" are the username and
Edimax IC-9000 | Manual - Page 31
of this IP camera. All the recorded files are with the name of hhmmss.crf format, where hh is the hour, mm is the minute, ss is the second of the starting time of the recording video. The files are segmented every five minutes. Users can use the free bundled CamPlay software to play
Edimax IC-9000 | Manual - Page 32
Edit" or "Delete" button. 2. Email/ftp Alarm - for each scheduling, if this is selected and the "Motion triggered" and/or "D/I triggered" is enabled, the IP camera will trigger the email/ftp sending in the scheduled time period when the video motion is detected and/or digital input alarm is detected
Edimax IC-9000 | Manual - Page 33
33
Edimax IC-9000 | Manual - Page 34
3-12 Date/Time The IP CAM can synchronize the date/time with the universally available time server (for example stdtime.gov.tw) through NTP protocol. The date/time will then be
Edimax IC-9000 | Manual - Page 35
the web login account. With this account, you can login to the IP CAM and do any modifications. The default account is "admin" without password. If the login account is forgotten, you can reset the IP CAM to the factory default settings by following the steps in section 3-17 and login with the
Edimax IC-9000 | Manual - Page 36
is some new firmware available for this IP CAM, you can upgrade the firmware via this page. A status message about the percentage done in the upgrade procedure is displayed. Please be noticed that during the upgrade procedure, do not power off the IP CAM, otherwise, the IP CAM could probably enter
Edimax IC-9000 | Manual - Page 37
37
Edimax IC-9000 | Manual - Page 38
3-15 Reboot You can restart the IP CAM manually on this page. All the connected video viewing users will be disconnected. 38
Edimax IC-9000 | Manual - Page 39
still find this IP CAM on the "Auto search" list. The steps to recover from "safe mode" are the following: 1. Use CamView to locate the IP CAM by clicking the "Auto Search" item on the CamView software. 2. Login into the web configuration page of the IP CAM. 3. Upgrade the firmware from the "Upgrade
Edimax IC-9000 | Manual - Page 40
the "reset" button on the cable for more than 4 seconds and release it, do this when the IP CAM is powered on. The IP CAM will reset to the factory default settings and restart automatically. The web login account will be "admin" (no password), the play-video password will be "ipcam" after reset to
Edimax IC-9000 | Manual - Page 41
Chapter IV Start Using CamView 4-1Install CamView Program 1. Please close other windows applications before proceeding. 2. Insert the installation CD into your CD-ROM drive and find the CamViewInstaller.exe. Double click it to start the installation process and you will see the "Welcome" window.
Edimax IC-9000 | Manual - Page 42
4. Click to proceed 5. Make a selection and click to proceed. 6. Click to proceed. 42
Edimax IC-9000 | Manual - Page 43
7. Click to exit. CamView installation now is completed. 43
Edimax IC-9000 | Manual - Page 44
of CamView on the windows desktop. 4-2-2 Layout of CamView Disk space information for recording Camera List Video Information Software Version Time Information Close Camview Snapshot Camera Name Cam Status Indicator Recording Auto Search List Speed dome Control Panel Minimize Display Area
Edimax IC-9000 | Manual - Page 45
4-2-3 Display Mode CamView supports 10 display modes. By pressing each mode, you can have a different live view display. 45
Edimax IC-9000 | Manual - Page 46
4-3 Managing CamView Camera IP cameras Right click the "Camera List" .You can add a new IP cam, create a new folder, rename the IP cam or the folder, and delete any IP cams or any folder. Right Click "Camera List", and choose New Camera 46
Edimax IC-9000 | Manual - Page 47
4-3-1 New Camera Users can add a new camera to the list by entering IP cam ID and password. Users can also name the IP cam. Enter Name & ID &Password and Click ok The Camera named "Test" will show under "Camera List" 47
Edimax IC-9000 | Manual - Page 48
4-3-2 New Folder Users can group IP cams by creating a new folder. Right click on the "Camera List". Click "New Folder" Name the new folder 48
Edimax IC-9000 | Manual - Page 49
4-3-3 Rename You can rename the folder. New folder shows up after you create it Rename folder 49
Edimax IC-9000 | Manual - Page 50
4-3-4 Delete You can delete the folder. Delete Folder 4-3-5 Refresh Status You can click Refresh Status to update the latest connection status of cameras 50
Edimax IC-9000 | Manual - Page 51
Adjustment By right clicking on a green light status IP cam, you can access the video display, do ID and password settings, adjust video settings, upgrade firmware, and delete from the list. Function List Right click Green status Camera Note: Camera status must be green in order to access function
Edimax IC-9000 | Manual - Page 52
4-3-7 Play on Selected Window Click it 4-3-8 ID / Password Settings Video shows up here Edit Camera Name, ID, and Password. Click OK to activate new setting. 52
Edimax IC-9000 | Manual - Page 53
4-3-9 Video Settings All the settings are categorized according to its function. Click Update for the changes to take effect. 53
Edimax IC-9000 | Manual - Page 54
automatically adjusts itself for image quality as priority in case of interference with the network environment. Vice versa, by selecting the Video Motion, the camera automatically adjusts itself for video motion. 4-3-9-2 Video Function Tab Video Color User can set the video as colored image or
Edimax IC-9000 | Manual - Page 55
Disable or enable the microphone. When you enable the Mic., the user who monitors the image can hear the sounds. Video Flip This function is only available for the Pan Tilt type of camera to flip the image. 55
Edimax IC-9000 | Manual - Page 56
available for the Pan/Tilt type of camera) Status of LED Control User can control the behavior of the status LED. Motion Detection Sensitivity The level of how sensitive the camera is in terms of the motion detection. 4-3-9-4 Camera Info Tab Show the IP camera information and firmware version. 56
Edimax IC-9000 | Manual - Page 57
, user has to enable it. Bandwidth The bandwidth setting for 3GPP connection from 32k to 256K. Video Setting Check the box to make the camera determine the best combination of the resolution and frame rate according to the given bandwidth. Microphone Allow user to hear sounds on the 3GPP Device
Edimax IC-9000 | Manual - Page 58
4-3-11 Firmware Upgrade The firmware upgrade function is designed for trouble shooting and technical assistance remotely. For firmware upgrade locally, please refer to 3-14 4-3-12 Delete Camera 58
Edimax IC-9000 | Manual - Page 59
"Auto reconnect" option reconnects the video session automatically if the session is closed by the IP Camera, for example, the settings of the IP Cam has been changed or the Internet connection of the IP Cam has lost. Stop: Click to stop video displaying. Pause: Click to pause video displaying
Edimax IC-9000 | Manual - Page 60
Recording status turns into green Properties: Show current IP cam's frame rate, consuming bandwidth, and camera physical site time. Snapshot & Continuous Recording Click to do continuous recording. Status light becomes red. Click to take snapshot. 60
Edimax IC-9000 | Manual - Page 61
a function that searches for all IP Cameras on your LAN (Local Area Network). At the very beginning of CamView startups, CamView automatically does the auto search. To do auto search manually, double click on the "Auto Search" folder. CamView searches all available IP cams in the LAN and lists all
Edimax IC-9000 | Manual - Page 62
startup. To refresh all cameras' status manually, right click on the Camera List and select "Refresh status". Green icon: means this IP Cam is online Red icon: means this IP Cam is offline. Yellow icon: means this IP Cam is online. However, the connection between IP Cam and CamView is bad due
Edimax IC-9000 | Manual - Page 63
blue to set each point the user want to stop in a patrol. After set each point, click "set" to save each point How long the camera stays for each preset point during patrol. Set the preset point. Moving speed Motor control panel Go to the preset point 63
Edimax IC-9000 | Manual - Page 64
Preset: This function will be activated after any PTZ Dome connect with video server Zoom in & out: This function will be activated after any analog PTZ Dome Camera connect to IP video server 64
Edimax IC-9000 | Manual - Page 65
4-5 Camview Software Functions CamView Function Bar. 4-5-1 Setting Click Setting and get into the Setting Function menu. Directories Settings: to set the directory path for the Recording and
Edimax IC-9000 | Manual - Page 66
Startup Options: Determine the camera state at startup Automatically start CamView when Windows starts: When Microsoft Windows starts, CamView will start running automatically. Restore the last time playing/running state:
Edimax IC-9000 | Manual - Page 67
be used and recorded by certain camera Camera: The information of the camera to be connected. You can either double click on one of the listed cameras or drag the camera off the Camera field to import the settings. Of course, manually key in the Name, CamID and password is fine as well. Mode: There
Edimax IC-9000 | Manual - Page 68
Continuous Recording: Window number. Enable/disable the scheduling for current window number. Enter the information of the camera to be connected. The schedule mode The start/end time (for play only/continuous recording mode) 68
Edimax IC-9000 | Manual - Page 69
(Periodic recording) The period of time for this schedule to be valid Arrange the days of week for camera to record Determine the priority between "current camera" and "scheduled camera" Recording/Playing Conflict: When the schedule time is reached, the program needs to determine either to run the
Edimax IC-9000 | Manual - Page 70
4-5-4 Language Click Language button to change the language settings. Right now, CamView supports 19 languages shown as following picture: 4-5-5 All Functions Any of following functions applies to all the channels in current layout only Record all: start/enable
Edimax IC-9000 | Manual - Page 71
4-6 Uninstall CamView There are two ways to invoke the CamView uninstaller. 1. Uninstall from the start menu Start CamView Uninstall CamView 2. Uninstall from the control panel Start Settings Control Panel Add or Remove Programs Select CamView program and click "Change/Remove" 71
Edimax IC-9000 | Manual - Page 72
Chapter V Start Using CamPlay There are two ways to start CamPlay for playback the recorded files or view the snapshot files. One way is clicking the CamPlay button on the tool bar of CamView. Click the CamPlay button. Another is double click on the Camplay shortcut on your Windows desktop. 72
Edimax IC-9000 | Manual - Page 73
5-1 CamPlay File Tree Recorded videos and snapshots are separated as shown: Name / ID of cameras Date: yyyy/MM/dd Time: hh/mm/ss The folder structure is: Camera (Name-ID) -- Date -- File (time) 73
Edimax IC-9000 | Manual - Page 74
5-2 CamPlay Functions Refresh file tree Directory Language Refresh File Tree: Click it to refresh the file trees especially after CamView is done with recording or snapshot. Directory: Click to get into the directory settins dialog for recording and snapshot. Click to change the settings. Note:
Edimax IC-9000 | Manual - Page 75
5-3 Language Right now, CamPlay supports 18 languages as following: English, Chinese, Japanese, French, Germany, Italian, Spanish, Hungarian, Turkish, Czech, Hebrew, Indian, and Finnish. 5-4 Headline Explanation HDD available space CamPlay Version Minimize CamPlay Exit CamPlay 75
Edimax IC-9000 | Manual - Page 76
is supported. Simply right click on the file you want to transcode and select "Covnert to .avi". Wait for a while and the transcoded file will be saved in the same folder with the original file. Select "Open folder" to browse all the files recorded in the same day from the same camera
Edimax IC-9000 | Manual - Page 77
simply double click on it and the snapshot will be opened by the default viewer of your computer. Drag time bar to select target playback video time of the video file. As mentioned earlier, snapshot is displayed by the default viewer of your computer. This gives you the ability to playback the recorded
Edimax IC-9000 | Manual - Page 78
Chapter VI Start Surveillance Software If you have IC-9000 as well as other Edimax IP cameras, you are suggested to install surveillance software for viewing all IP cameras you own. 6-1 Installing IP Camera Surveillance Software The IP camera surveillance software provides various functions like
Edimax IC-9000 | Manual - Page 79
79
Edimax IC-9000 | Manual - Page 80
3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, then click 'Next' to continue. 4. Here lists all options you chose in previous steps, if everything's correct, click 'Install' to start installing procedure, or click 'Back' to
Edimax IC-9000 | Manual - Page 81
. 6. When you see this window, it means the software installing procedure is complete. Please click 'Finish' to finish the procedure (IP camera surveillance software will start after you click 'Finish' button, if you want to start it later, uncheck 'Launch IPCam Surveillance Software' box). 81
Edimax IC-9000 | Manual - Page 82
6-2 Using IP camera Surveillance Software You can click 'IPCam Surveillance Software' icon from desktop, quick launch bar, or start menu to start the IP camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor's resolution is '1024 x 768'.
Edimax IC-9000 | Manual - Page 83
IP camera surveillance software will switch displaying the image of all connected camera supported cameras. Click this button to return the camera to 'Home' (default) position. This function is only available for supported cameras. Recording Start video recording. Configure Software / camera
Edimax IC-9000 | Manual - Page 84
Close window Terminates IP camera surveillance software. (stop surveillance) Minimize window Minimizes IP camera surveillance software window. Video displaying Displays the image of all cameras by the display layout you area selected. 84
Edimax IC-9000 | Manual - Page 85
: and a popup menu will Please select 'Configure Cameras' to configure cameras: Note: If you're prompted by a windows security alert which asks you if you want to block 'IPCam Viewer' program, please click 'Unblock' button, of IP camera surveillance software will not be able to function correctly
Edimax IC-9000 | Manual - Page 86
parameters of selected camera in every camera configuration fields. Rescan all cameras on your local network. If you didn't see the camera you expected in 'Camera Search' box, or new cameras has been joined to your local network after last scan. Input the name of camera here. Default value is the
Edimax IC-9000 | Manual - Page 87
* Web Port* Password Video Format** Reset OK Cancel Input the IP address of camera. Input the user name of camera. Input the web port of the camera. By default it's '80'. Input the password of camera. Default value is '1234'. You should change the password if you changed the password of selected
Edimax IC-9000 | Manual - Page 88
6-3-1-2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. 88
Edimax IC-9000 | Manual - Page 89
items: Item Channel One Time Schedules Description Select the channel number you wish to set. You can specify the one-time schedule for selected camera; this schedule will be executed once only. Click this button and a new window will appear: New (One Time Schedules) Edit Delete Please specify
Edimax IC-9000 | Manual - Page 90
Edit Delete OK Cancel You can modify a scheduled recording item. Select a schedule in 'One Time Schedules' list, and click 'Edit' button to edit the start and end time of this schedule. Delete a selected schedule item. Save settings in this tab. Discard all settings in this tab. 90
Edimax IC-9000 | Manual - Page 91
channel number you wish to set. Check this box and the IP camera surveillance software will not play the audio captured by this camera. Check this box and the IP camera surveillance software will not record the audio captured by this camera. Save settings in this tab. Discard all settings in this
Edimax IC-9000 | Manual - Page 92
concerned, it's not recommended to use this function since some tiny changes you may need to know may not be able to trigger the camera and the camera will not start recording. Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set
Edimax IC-9000 | Manual - Page 93
OK Cancel Save settings in this tab. Discard all settings in this tab. 93
Edimax IC-9000 | Manual - Page 94
' button to pick a directory in your hard disk. Free Recording Displays remaining storage space. Space Max Video File Size Defines the maximum file size of every video file. When the size of file exceeds this value, IP camera surveillance software will open another file to record the video. Scan
Edimax IC-9000 | Manual - Page 95
OK Cancel Save settings in this tab. Discard all settings in this tab. 95
Edimax IC-9000 | Manual - Page 96
'E-Mail Setting' tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item Description E-Mail Subject Specify the subject of
Edimax IC-9000 | Manual - Page 97
same with your POP3 username (the one you SMTP Account used to receive email). Please refer to the setting of your email software or ask your ISP / network administrator if you're not sure about this. SMTP Password Input the SMTP password of your SMTP server here. In most cases, it's the same with
Edimax IC-9000 | Manual - Page 98
Security If you don't want other people to access this IP camera surveillance software, you can set a password to protect it. You'll need to input the password every time you wish to use this IP camera surveillance software: To set password, please use 'Security' tab in 'General Options' menu: Here
Edimax IC-9000 | Manual - Page 99
Disable Password authentication is not required when this software starts. Password Input the password you wish to use here. Confirm Password Input the password you wish to use here again. 99
Edimax IC-9000 | Manual - Page 100
6-3-2-4 About This tab shows the version number of the IP camera surveillance software you're using. 100
Edimax IC-9000 | Manual - Page 101
6-4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly. Displays
Edimax IC-9000 | Manual - Page 102
Displays the video of up to 6 cameras. Layout style 3: 6 Cameras Displays the video of up to 8 cameras. Layout style 4: 8 Cameras Layout style 5: 9 Cameras Displays the video of up to 9 cameras. Displays the video of up to 10 cameras. Layout style 6: 10 Cameras Displays the video of up to 13
Edimax IC-9000 | Manual - Page 103
Displays the video of up to 16 cameras. Layout style 8: 16 Cameras 103
Edimax IC-9000 | Manual - Page 104
6-5 Full-screen Modes If you want to use all available spaces on your monitor to display surveillance image, you can click 'Full Screen' button to switch display mode to full-screen mode. To exit full-screen mode, press 'ESC' key. 104
Edimax IC-9000 | Manual - Page 105
6-6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click 'Scan' button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
Edimax IC-9000 | Manual - Page 106
6-7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera's view, or enlarge the image size of a certain object to see its detail. Please select a camera in video displaying area by clicking on its
Edimax IC-9000 | Manual - Page 107
PTZ For cameras that support pan - tilt function, you can change the position that camera points to, to see different places that fall in the scope of camera's view. Please select a camera in video displaying area by clicking on its image, and then click the directions you wish the camera to move
Edimax IC-9000 | Manual - Page 108
'Start Recording' button: When recording starts, you'll see a message displayed in message displaying box like '1/1 10:00:00, Camera 2 Start Manual', which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click 'Start Recording' button again, and you'll see a message
Edimax IC-9000 | Manual - Page 109
it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (search all videos recorded by motion detection function and falls in a specific period of time). Please define the start and end date / time of the time period you
Edimax IC-9000 | Manual - Page 110
password No complicated NAT/router settings needed. Free video management software - CamView program accompanied for easy access and multi-camera management. 3GPP/ISMA support View video from your Wireless or wired Ethernet network Supports PPPoE protocol for direct ADSL connection. Motion Detection
Edimax IC-9000 | Manual - Page 111
Specifications Models Power Processors Network interface Image sensor Light sensitivity Lens Water resistant IR LEDs Buttons Video compression Resolutions Frame rate Video streaming Image settings Security Installation, management and DDNS-Fee Outdoor IP Camera reset button, to factory default
Edimax IC-9000 | Manual - Page 112
Users Alarm and event management Power adaptor, camera bracket, RJ45 ethernet cable, quick installation guide, CD with installation tool/software and User's Manual, ID/Password card. Surveillance application for viewing and archiving up to 16 cameras Up to 20 simultaneous unicast users Unlimited
Edimax IC-9000 | Manual - Page 113
Video Users The maximum allowed video users for a single IP Cam at the same time is dependent on the video settings including "Internet speed" and resolution. The followings are the summary of the maximum allowed video users: Notice: When the IP camera is doing NAS recording, this is counted as one
Edimax IC-9000 | Manual - Page 114
the Internet speed (bandwidth) connected to your home network. If the "Internet speed" setting of your IP camera is very large, but your real Internet speed video quality, you better have broadband service from your ISP and set the "Internet speed" of the IP camera a little lower than the real
Edimax IC-9000 | Manual - Page 115
should I do if the password is forgotten, and the ID/password card is missing? A: The easiest way to solve this problem is to reset the IP Cam to the factory default. Please press the reset button on the cable of the IP Cam for more than 4 seconds and release it. The IP Cam will then restart to the
Edimax IC-9000 | Manual - Page 116
you need to make sure that the WiFi interface on your PC/notebook computer is disabled. After about one minute, you can run the CamView software to access the IP camera, the CAM ID should be displayed on the "auto-search" list. You can then see the video by double clicking the
Edimax IC-9000 | Manual - Page 117
for 3G mobile phone to display the video stream from some network devices, including IP camera. The IC-9000 supports the RTSP protocol and video codec needed by 3GPP/ISMA. Users only need to access the address rtsp://ip_cam_address/CAM_ID.password on the 3G mobile phone to access the video of the
Edimax IC-9000 | Manual - Page 118
118

Match case Limit results 1 per page