Edimax IC-9000 Manual - Page 39
Safe Mode
View all Edimax IC-9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3-16 Safe Mode If by some abnormal operation, for example, powered off during the critical point of the upgrade procedure, the IP CAM will enter into the safe mode. In this mode, you will see the following "Safe mode" page when login into this IP CAM. Please do the upgrade operation immediately to recover the system. On this safe mode, the IP CAM cannot display the video on the CamView software, but you can still find this IP CAM on the "Auto search" list. The steps to recover from "safe mode" are the following: 1. Use CamView to locate the IP CAM by clicking the "Auto Search" item on the CamView software. 2. Login into the web configuration page of the IP CAM. 3. Upgrade the firmware from the "Upgrade" page. 39
39
3-16 Safe Mode
If by some abnormal operation, for example, powered off during the critical point of the
upgrade procedure, the IP CAM will enter into the safe mode. In this mode, you will see the
following “Safe mode” page when login into this IP CAM. Please do the upgrade operation
immediately to recover the system. On this safe mode, the IP CAM cannot display the video
on the CamView software, but you can still find this IP CAM on the “Auto search” list.
The steps to recover from “safe mode” are the following:
1. Use CamView to locate the IP CAM by clicking the “Auto Search” item on the CamView
software.
2. Login into the web configuration page of the IP CAM.
3. Upgrade the firmware from the “Upgrade” page.