Electrolux 4870PZ Owners Guide - Page 13

HOW TO MAINTAIN, How To Replace Brush Roll Belt, Disposable Dust Bag and Filters, How To Replace

Page 13 highlights

HOW TO MAINTAIN (continued) The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the bag, belt, and brush roll often. How To Replace Brush Roll Belt (continued) Disposable Dust Bag and Filters The disposable dust bag plays a very important role in the efficiency of a vacuum cleaner. The purpose of the paper bag is to trap dirt. As the bag traps dirt, it must also be porous enough to allow air to pass on through. If the paper bag becomes clogged, no air can pass through the cleaner and no cleaning can take place regardless of how powerful the unit. Change the dust bag and check the filters frequently. Some fine particles can restrict airflow very quickly and will decrease performance even before the bag appears to be full. When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances, the bag and filters may require more frequent maintenance. 5 5. Insert right end into base. Make sure it is fully into position. Ensure belt is centered. NOTE: The new belt will appear to be too large. This is normal. How To Replace Bags-Style RR Filteraire NOTE: Turn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum cleaner without the dust bag or the filter. NOTE: Style RR Filteraire bags must be used to maintain HEPA grade filtration and prolong the life of the HEPA filter. To Remove Bag: Front Cover Latch Bag Cover Slots 6 6. Replace base plate by first inserting all 4 front tabs into slots on base. Rotate down on cleaner and replace 3 screws. 1. Release front cover latch by lifting up. Pivot bag cover away from cleaner and remove. NOTE: Bag cover will not shut if paper bag is not properly installed. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

HOW TO MAINTAIN
(continued)
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the bag,
belt, and brush roll often.
5.
Insert right end into base. Make sure it is fully into
position. Ensure belt is centered.
NOTE: The new belt
will appear to be too large. This is normal.
How To Replace Brush Roll Belt
(continued)
5
6.
Replace base plate by first inserting all 4 front tabs
into slots on base. Rotate down on cleaner and replace
3 screws.
Slots
6
Disposable Dust Bag and Filters
The disposable dust bag plays a very important role in
the efficiency of a vacuum cleaner. The purpose of the
paper bag is to trap dirt. As the bag traps dirt, it must also
be porous enough to allow air to pass on through. If the
paper bag becomes clogged, no air can pass through the
cleaner and no cleaning can take place regardless of how
powerful the unit. Change the dust bag and check the
filters frequently. Some fine particles can restrict airflow
very quickly and will decrease performance even before
the bag appears to be full.
When vacuuming carpet fresheners or cleaners, powder,
plaster dust, or similar fine substances, the bag and filters
may require more frequent maintenance.
How To Replace Bags–Style RR
Filteraire
NOTE:
Turn off the switch and unplug the electrical
cord before changing dust bag. Never operate
the vacuum cleaner without the dust bag or
the filter.
NOTE: Style RR Filteraire bags must be used to
maintain HEPA grade filtration and prolong the
life of the HEPA filter.
To Remove Bag:
1.
Release front cover latch by lifting up. Pivot bag cover
away from cleaner and remove.
NOTE: Bag cover will not shut if paper bag is not
properly installed.
Front Cover
Latch
Bag Cover
13