Electrolux C2132B Owners Guide - Page 8

Electrolux C2132B - Home Care Commercial Upright Vacuum Manual

Page 8 highlights

Attach Lower Cord Hook Insert the power cord into the lower cord hook (A), as shown. Snap the hook into the lower handle. Pull up on the cord to tighten but leave enough slack near the base so the cord is not strained when the handle is lowered. A Attach Upper Cord Hook Pull the spring on the electrical cord upward toward the top of the handle. Make sure slots in handle are positioned properly, see Detail B. Insert the lower half of the spring into the upper cord hook, as shown. Snap the hook into the upper handle, directions below. 1. Place inner tab into slot 2. Press hook around handle 3. SNAP opposite inner tab into place Cord Storage Wrap the cord around the two cord hooks. Fasten the plug to the cord to prevent unwinding. Hook Bag Top Slip the ring at the top of the cloth bag over the bag support hook on the back of the cord hook. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

8
Hook Bag Top
Slip the ring at the top of the cloth bag over
the bag support hook on the back of the
cord hook.
1.
Place
inner tab
into slot
2.
Press hook
around
handle
3.
SNAP opposite
inner tab into
place
Attach Lower Cord Hook
Insert the power cord into the lower cord hook
(A), as shown. Snap the hook into the lower
handle. Pull up on the cord to tighten but leave
enough slack near the base so the cord is not
strained when the handle is lowered.
Attach Upper Cord Hook
Pull the spring on the electrical cord upward
toward the top of the handle. Make sure slots in
handle are positioned properly, see Detail B.
Insert the lower half of the spring into the upper
cord hook, as shown. Snap the hook into the
upper handle, directions below.
Cord Storage
Wrap the cord around the two cord hooks.
Fasten the plug to the cord to prevent unwinding.
A