Electrolux E23CS78HPS Specification sheet - Page 2

Counter-Depth Refrigerator E23CS78HPS professional series Standard Refrigerator Depth vs. Counter Depth Counter Depth 235/8" 26 7/8" 35 5/8" 7 5/8" 69 5/16" A C B "Built-In Look" Cutout Dimensions (A) 70 1/4" (B) 36" (C) 25" 281/2" Standard Depth Top View Recessed water line Recessed electrical outlet 24" Cabinet Allow 1" min. clearance at rear for proper air circulation and water / electrical connections 25" Side Panels, 1/2" min. width 25" Countertop Allow at least 45 1/4" with doors in 90° open position 68 3/16" with 3/8" rollers Water line inlet location (left bottom rear) 23 5/8" 29 1/2" to handle extension Power cord location (right bottom rear) Note: Optional Louvered Trim Kit and Collar Kit available for Counter-Depth Refrigerator. For specifications, refer to Louvered Trim Kit (4480) Installation page or Collar Kit (ECK23CDS) Installation page on web. Counter-Depth Refrigerator Specifications • Product Weight - 300 Lbs. • Voltage Rating - 120V / 60 Hz / 15 or 20 Amps • Connected Load (kW Rating) @ 120 Volts = 1.02 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 8.5 Amps • Always consult local and national electric & plumbing codes. • When installing next to wall allow 3-1/2" handle clearance. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer / crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90° door swing which will provide drawer / crisper access with restricted removal.) • To ensure optimum performance, avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). • Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. • Adjustable front rollers to assist with door alignment. • If optional Collar Kit (PN # ECK23CDS) is to be used, different cutout dimensions are required. (Refer to Collar Kit ECK23CDS Installation Specifications page on web.) • If optional Louvered Trim Kit (PN # 4480) is to be used, different cutout dimensions are required. (Refer to Louvered Trim Kit 4480 Installation Specifications page on web.) "Built-In Look" Specifications • Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for ease of installation, proper air circulation, and plumbing / electrical connections. • Remove all wall / floor molding prior to installation. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Optional Accessories • Collar Kit - (PN # ECK23CDS). • Louvered Trim Kit - (PN # 4480). Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca E23CS78HPS 09/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.