Electrolux E23CS78HPS Specification sheet - Page 3

Collar Kit (ECK23CDS) Installation E23CS78HPS, E23CS78HSS Collar Kit (ECK23CDS) Kit includes: Side/top trim pieces and corner gussets with screws. 26 7/8" 35 5/8" 7 5/8" A Collar Kit C 68 3/16" with 3/8" rollers B Cutout Dimensions (A) 70 1/4" (B) 361/8" (C) 241/2" min.* *Minimum depth from face of cabinet side panels and requires recessed electrical outlet and water line. Note: Refer to detailed Collar Kit (ECK23CDS) Installation instructions included with kit or on web. Allow at least 45 1/4" with doors in 90° open position 69 5/16" 23 5/8" Depth to handle extension* Side Trim Piece Magnetic Tape Refrigerator Case Door Gasket 3/4" Cabinet Side Panel 1/2" Cabinet Side Panel Side Trim Piece Side trim must be installed flush with the gasket contact surface on the refrigerator case. *Professional Series - 29 1/2" Designer Series - 29 3/8" Recessed water line Recessed electrical outlet Top Trim Piece Cabinet Underside Refrigerator Case Overhead Cabinet Door Top Trim Piece 1" min. Clearance 24" Cabinet Top View 25" Countertop Cabinet Side Panels 1/2" min. width Counter-Depth Refrigerator Optional Collar Kit (ECK23CDS) Specifications • To use Collar Kit (PN # ECK23CDS), an enclosure is required around Counter-Depth Refrigerator having an opening of 70-1/4" H x 36-1/8" W with minimum cabinet side panels of 24-1/2" D x 1/2" W. • Minimum 24-1/2" depth requires recessed electrical outlet and water line. • Add maximum of 1/4" to 70-1/4" opening height when installed with frameless-style overhead cabinets, for door opening clearance. • Cabinet or soffit above unit must extend out to same depth as side panels. • To provide additional clearance for overhead cabinet doors when in open position, allow 1" from underside of cabinet to bottom of cabinet door. • A minimum width of 36-1/8" is required for refrigerator installation with an additional 1/2" or 3/4" added for each side panel. • If 1/2" side panels are used, then side trim piece and panel will be even. If 3/4" side panels are used, then 1/4" of side panel will extend beyond collar trim and must be finished. • For detailed Counter-Depth Refrigerator installation, refer to model-specific product page and installation guide on web. • Collar Kit (PN # ECK23CDS) can also be used with Electrolux ICON® refrigerator models E23CS75DSS, E23CS78EPS, E23CS78ESS, E23CS78GPS and E23CS78GSS. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca ECK23CDS INST 01/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.