Electrolux E30MC75PPS Complete Owners Guide English - Page 19
Setting for Best Results
View all Electrolux E30MC75PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting for Best Results 19 Oven vents Location Lower oven rack supports The ovens are vented above the doors. When the oven is on, warm air flows through the vents. This venting is necessary for proper air circulation in the oven and good baking results. Steam or moisture may appear near the vents, this is normal. Do not block the oven vents. Installing Oven Rack Supports Always install oven rack support before turning on the oven (when the oven is cool). Oven Vent Warm Air To aid installation of the porcelain oven rack supports, apply a thin layer of cooking oil to all the prongs of the supports shown below. Oven Vent Warm Air To install oven rack supports: 1. Hold the oven rack support at a slight angle and insert prongs into the holes at the top of the oven cavity (Arrow 1). 2. Lift the rack into the top holes, aligning the bottom prongs with the bottom holes (Arrow 2). 3. Once the upper prongs are in place, hold the oven rack support flush with the oven side and insert the bottom prongs into the bottom holes (Arrow 3). 4. Slide the bottom prongs down into the lower holes. Some force may be required to set the rack into place (Arrow 4). To remove the ladder rack support for a self-clean cycle, reverse the order used when installing the ladder rack supports.