Electrolux E36EC75HSS Installation Instructions - Page 3

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) 30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet. 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" (0.3 cm) Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper. 36"(91.4 cm) Min. L Min. Recommended Distance Between Rear Edge of Cutout and Nearest Combustible Surface Above Countertop 10" ( 25.4 cm) 18" (45.7 cm) If a drawer is present underneath, allow at least 8" (20.3 cm) of clearance below the countertop. CAUTION Never store flammable products in the drawer. 25" Min. (63.5 cm Min.) For dimensions E, F, G & H, see Table on page 1. 12" (30.5 cm) K Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit). CAUTION To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 7" (17.8 cm) beyond the bottom of the cabinets. Approximate Location of Junction Box Model 36'' (91.4 cm) Figure 3 - COUNTERTOP CUTOUT OPENING K 7½'' (19.1 cm) L 1'' (2.5 cm) Important Notes to the Installer 1. Read all instructions contained in these installation instructions before installing the cooktop. 2. Remove all packing material before connecting the electrical supply to the cooktop. 3. Observe all governing codes and ordinances. 4. Be sure to leave these instructions with the consumer. Important Note to the Consumer Keep these instructions with your Use and Care Guide for future reference. Depth Adjustment Filler Kit #903051-9010 This cooktop is designed to replace existing unit. If the depth of your countertop opening is bigger than 7¼" (18.4 cm) and less than 8½" (21.6 cm) you can order a free filler kit #903051-9010 by calling Service Center at 1-877-4ELECTROLUX (1-877-435-3287). Optional Items Available: • A 9" (22.9cm) Stainless Steel Backsplash Kit #903048-9010 • A Black Knobs Kit #903049-9010 Those kits can be order through the Service Center at 1-877-4ELECTROLUX (1-877-435-3287). However all cost related to those kits will be at customer charges. 3