Electrolux EW30EC55GB Installation Instructions (All Languages) - Page 2

Countertop Cutout Opening

Page 2 highlights

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) 30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet. 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" (0.3 cm) Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper. AL Min. K Min. Recommended Distance Between Rear Edge of Cutout and Nearest Combustible Surface Above Countertop 10" ( 25.4 cm) 18" (45.7 cm) G I H 24" (61 cm) 12" (30.5 cm) J Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit). 2 1/2" (6.4 cm) Min. From Edge of Cutout to Front Edge of Countertop Install junction box at a location which will be easy to reach and that will not interfere with the cooktop installation. We suggest 12" (30.48cm) lower than the countertop. Letters on this figure refer to chart on front page except for J , K & L. If a drawer is present underneath, allow at least 10" (25.4cm) of clearance below the countertop. CAUTION Never store flammable products in the drawer. CAUTION To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. Model 30'' (76.2 cm) 36'' (91.4 cm) J 7½'' (19.1 cm) 7½'' (19.1 cm). Figure 2 - COUNTERTOP CUTOUT OPENING K 2'' (5.1 cm) 2'' (5.1 cm) L 30'' (72.6 cm) 36'' (91.4 cm) 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

2
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
I
H
G
Figure 2 – COUNTERTOP CUTOUT OPENING
CAUTION
To eliminate the risk of burns or
fire by reaching over heated surfaces, cabinet
storage space located above the cooktop should
be avoided. If cabinet storage is provided, risk
can be reduced by installing a range hood that
projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
Letters on this figure refer to chart on front page except for
J , K & L
.
Overhead Cabinet Should Not Exceed a
Maximum Depth of 13” (33 cm)
30” (76.2 cm) Min.
Clearance Between the
Top of the Cooking
Platform and the Bottom
of an Unprotected Wood
or Metal Cabinet.
24” (61 cm) Min. when
Bottom of Wood or Metal
Cabinet is Protected by
Not Less Than 1/8” (0.3
cm) Flame Retardant
Millboard Covered With
Not Less Than No. 28
MGS Sheet Steel, 0.015”
(0.4 mm) Stainless
Steel, 0.024” (0.6 mm)
Aluminum or 0.020” (0.5
mm) Copper.
2 1/2” (6.4 cm) Min. From Edge
of Cutout to Front Edge of
Countertop
18”
(45.7 cm)
J
Min. From Edge of
Cooktop to Nearest
Combustible Wall
(Either Side of Unit).
12”
(30.5 cm)
10”
( 25.4 cm)
K
Min. Recommended
Distance Between Rear
Edge of Cutout and
Nearest Combustible
Surface Above
Countertop
24”
(61 cm)
Install junction box at a
location which will be easy
to reach and that will not
interfere with the cooktop
installation. We suggest
12” (30.48cm) lower than
the countertop.
If a drawer is present
underneath, allow at least
10” (25.4cm) of clearance
below the countertop.
CAUTION
Never store
flammable products in the
drawer.
L
Min.
MODEL
J
K
L
30’’ (76.2 cm)
7½’’ (19.1 cm)
2’’ (5.1 cm)
30’’ (72.6 cm)
36’’ (91.4 cm)
7½’’ (19.1 cm).
2’’ (5.1 cm)
36’’ (91.4 cm)