Epson 15000 User Manual - Page 50

Installing the Network Image Express Card - gt scanner software

Get Epson 15000 - GT - Flatbed Scanner PDF manuals and user guides
UPC - 010343845893
View all Epson 15000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Installing the Network Image Express Card The Network Image Express card (B12B808393) allows you to share your scanner without the need for a server. The card supports 10BaseT/100BaseT full and half duplex networks. Any computer on the network that has the EPSON Scan software installed can scan and import a document from the Epson GT-15000. For information on setting up and using the scanner on a network, see your on-screen Epson GT-15000 Reference Guide. Follow these steps to install the card in your scanner and connect it to your network: 1. Turn off the scanner and disconnect the power cord and any cables. Caution: Static electricity can damage electronic components like the Network Image Express card. To discharge static electricity, touch the scanner's metal frame before handling the card. 2. Remove the two screws securing the shield plate to the optional interface slot. Then remove the plate. Put the screws and shield plate in a safe place in case you want to reinstall the shield plate later. 3. Turn the card over so that the component side is facing down, and insert it in the optional interface slot. 4. Push gently until the card is firmly seated. 5. Tighten the retaining screws and plug in the scanner. 50 Using Optional Equipment

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
50
Using Optional Equipment
Installing the Network Image Express Card
The Network Image Express card (B12B808393) allows you to share your scanner
without the need for a server. The card supports 10BaseT/100BaseT full and half
duplex networks.
Any computer on the network that has the
EPSON Scan software installed can scan and
import a document from the Epson
GT-15000.
For information on setting up and using the
scanner on a network, see your on-screen
Epson GT-15000 Reference Guide.
Follow these steps to install the card in your scanner and connect it to your network:
1.
Turn off the scanner and disconnect the power cord and any cables.
Caution:
Static electricity can damage electronic components like the Network
Image Express card. To discharge static electricity, touch the scanner’s metal
frame before handling the card.
2.
Remove the two screws securing the shield
plate to the optional interface slot. Then
remove the plate.
Put the screws and shield plate in a safe
place in case you want to reinstall the
shield plate later.
3.
Turn the card over so that the
component side is facing down, and
insert it in the optional interface slot.
4.
Push gently until the card is firmly
seated.
5.
Tighten the retaining screws and plug in
the scanner.