Epson 1735W Operation Guide - EasyMP - Page 89
Check, Remedy, For Wireless LAN, Quick Connection Mode
UPC - 010343869554
View all Epson 1735W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Troubleshooting 89 fThe projector is not found when EMP NS Connection is started Check Remedy Is the wireless LAN unit connected? For Wireless LAN Check that the supplied wireless LAN unit is securely connected. Is the projector's configuration menu open? While the configuration menu is displayed, network connection becomes invalid. Close the configuration menu and return to the EasyMP standby screen. Are the computer's LAN card and the built-in LAN function available? Check that LAN is valid by checking "Control Panel" -"System" in the device manager and so on. Is the projector's SSID the same as that of the access Set a different SSID. See the projector User's Guide for more information. point? Quick Connection Mode Is the DHCP function for wired LAN turned ON? Quick Connection Mode Turn OFF the "DHCP" setting for "Wired LAN" from the configuration menu. See the projector User's Guide for more information. Was the network adapter used selected correctly with If the computer has multiple LAN environments, it cannot connect unless the network adapter is selected EMP NS Connection? correctly. When using a computer running Windows, start EMP NS Connection, and select the network adapter you are using from "Set Options" -"Switch LAN". s p.47 For wireless LAN connection, is the wireless LAN setting enabled when the computer is in power save mode? Enable the wireless LAN. Are there any obstacles between the access point and Sometimes interference prevents the projector from being found in a search. Check for any obstacles between the computer or projector? the access point and the computer or projector, and change their position to improve communication. For Wireless LAN Is the computer's wireless LAN broadcast strength set Set the broadcast strength to maximum. to low? Does the wireless LAN conform to 802.11g, 802.11b, The wireless LAN unit is only compatible with standards 802.11g, 802.11b, and 802.11a, and not with other or 802.11a? standards such as 802.11. Is the firewall turned off, or has the firewall been registered as an exception? For Wireless LAN When you do not wish to turn off the firewall or register the firewall as an exception, make the necessary settings to open the ports. The ports used by EMP NS Connection are "3620", "3621", and "3629".