Epson 7700p User Manual - Lens Options
Epson 7700p - PowerLite XGA LCD Projector Manual
 |
View all Epson 7700p manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 7700p manual content summary:
- Epson 7700p | User Manual - Lens Options - Page 1
2. Attaching the long throw attachment lens Memo Ensure that the lens is attached and detached in a clean room free from dust. Dust entering the inside of the lens may result in damage. 2-1. Removing the front lens unit from the standard lens (1) Remove the front lens cap and cord from the standard - Epson 7700p | User Manual - Lens Options - Page 2
Memo • Gently move the front lens unit to the left and right and then pull it out horizontally when removing it. • Do not leave the projector for long periods, or carry it around with the front lens unit detached. Dust entering the inside of the lens may result in damage. 13 - Epson 7700p | User Manual - Lens Options - Page 3
the direction of the arrow until it will turn no further. (4) Insert the end of the cord attached to the front lens cap into the projector's case. (5) Remove the front lens cap to use the - Epson 7700p | User Manual - Lens Options - Page 4
Memo • Once the lens has been attached, gently move it left and right to ascertain that it is fixed firmly in place. • Use the long throw attachment lens's rear cap as the rear cap for the front lens unit of a standard lens. • Ensure that both the front and rear lens caps are set in place when the - Epson 7700p | User Manual - Lens Options - Page 5
Zoom : x1.3 3. F number : 1.7 to 2.3 4. Size : Diameter 138 x length 101mm 5. Weight : Approximately 1600g 4-2. External view with the long throw attachment lens mounted "QQSPYJNBUFMZNN Memo Do not project images with the front lens cap set in place. Failure to observe this may result - Epson 7700p | User Manual - Lens Options - Page 6
2. Attaching the wide attachment lens Memo Ensure that the lens is attached and detached in a clean room free from dust. Dust entering the inside of the lens may result in damage. 2-1. Removing the front lens unit from the standard lens (1) Remove the front lens cap and cord from the standard lens. - Epson 7700p | User Manual - Lens Options - Page 7
Memo • Gently move the front lens unit to the left and right and then pull it out horizontally when removing it. • Do not leave the projector for long periods, or carry it around with the front lens unit detached. Dust entering the inside of the lens may result in damage. 13 - Epson 7700p | User Manual - Lens Options - Page 8
the direction of the arrow until it will turn no further. (4) Insert the end of the cord attached to the front lens cap into the projector's case. (5) Remove the front lens cap to use the - Epson 7700p | User Manual - Lens Options - Page 9
Memo • Once the lens has been attached, gently move it left and right to ascertain that it is fixed firmly in place. • Use the wide attachment lens's rear cap as the rear cap for the front lens unit of a standard lens. • Ensure that both the front and rear lens caps are set in place when the wide - Epson 7700p | User Manual - Lens Options - Page 10
1mm 2. Zoom : x1.3 3. F number : 1.7 to 2.3 4. Size : Diameter 116 x length 113mm 5. Weight : Approximately 1400g 4-2. External view with the wide attachment lens mounted Approximately 480mm Memo Do not project images with the front lens cap set in place. Failure to observe this may result
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
12
2.
Attac
hing the long thr
o
w attac
hment lens
Memo
Ensure that the lens is attached and detached in a clean
room free from dust. Dust entering the inside of the
lens may result in damage.
2-1.
Removing the front lens unit from the standard lens
(1)
Remove the front lens cap and cord from the standard lens.
Tug on the cord gently to remove it.
Cord
Front lens cap