Epson 8100i User Manual - Page 92
Problems with the Remote Control
View all Epson 8100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Freeze A/V Mute E-Zoom Power R/C ON OFF 3 2 5 4 1 Enter Esc Problems with the Remote Control ON/OFF switch The projector doesn't respond to remote control commands. s Make sure the remote control is turned on. s Make sure you are within 30 feet of the projector, and within range of the infrared receivers (approximately 30° to left or right and 15° above or below). s The remote control batteries may not be installed correctly or may be low on power. Check the installation or replace them as described on page 12. s Dim the room lights and turn off any fluorescents. Make sure the projector is not in direct sunlight. Strong lighting, especially fluorescent lights, may affect the projector's infrared receivers. s Turn off any nearby equipment that emits infrared energy, such as a radiant room heater. You can't control the mouse pointer with the remote control. s Make sure the mouse cable is securely connected to both your computer's mouse port (using the main cable) and the projector's mouse port. See Chapter 1 for details. s Make sure you have used the correct cable. The PS/2 mouse cable and Macintosh mouse cable look the same, but they are not identical. Check the label on the end of the cable. 86 Solving Problems