Epson 820p User Manual - Page 41
Using the Remote Control, Controlling the Picture and Sound, Switching Between Picture Sources
UPC - 010343844490
View all Epson 820p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector's front sensor can detect signals bounced off the screen). I Press the button for the function you want to use. See the following pages for instructions. I For some functions, you need to use the button like a mouse to navigate on the screen. Press the edge of the button with your thumb-or grasp it between your thumb and finger and tilt it in the direction you want to move. Controlling the Picture and Sound You can use the remote control to select your source, adjust the volume, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, or display a picture-in-picture video image. Make sure you have set up your projector and connected any equipment as described in Chapter 1 or Appendix A. Switching Between Picture Sources If you've connected your projector to a computer and/or video sources, you can use the buttons on the remote control to switch between the different sources. I Press the Comp2/YCbCr button to select a computer or video source connected to the Computer 2/Component Video port on the projector. I Press the Comp 1 button to select a computer connected to the DVI Computer 1 port on the projector. I Press the Video button to select a composite video source. I Press the S-Video button to select an S-Video source. After you select a source, the screen goes dark for a moment before the image appears. Menu Help Comp1 Comp2/YCbCr Source Video Auto S-Video Resize P in P Preset Using the Remote Control 35