Epson 820p User Manual - Page 72
into place. The projector won, t come on if the lamp cover is
UPC - 010343844490
View all Epson 820p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
caution Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 5. Grasp the lamp as shown and pull it straight out. 6. Gently insert the new lamp. 7. Once the lamp is fully inserted, tighten its screws. 8. To replace the lamp cover, insert the tabs and then snap the cover into place. (The projector won't come on if the lamp cover is loose.) 66 Maintaining and Transporting the Projector
66
Maintaining and Transporting the Projector
5.
Grasp the lamp as shown and pull it straight out.
6.
Gently insert the new lamp.
7.
Once the lamp is fully inserted, tighten its screws.
8.
To replace the lamp cover, insert the tabs and then snap the cover
into place. (The projector won
’
t come on if the lamp cover is
loose.)
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.