Epson ActionScanner II PC User Manual - TWAIN Mac - Page 63

Set the Brightness, Highlight, or Gamma Correction options, Select 3 pass

Get Epson ActionScanner II PC - ActionScanning System II PDF manuals and user guides View all Epson ActionScanner II PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

The image cannot be printed on the printer, the printout is garbled, or the printout is not an image. Check that the printer is properly connected to your Macintosh and is set up correctly; see your printer manual. Check that your software is properly installed and set up for your printer; see your software manual. Images cannot be scanned at all or only a few dots appear in the scanned image. Try different EPSON TWAIN settings. Be aware that some settings disable others for a particular effect. Also, depending on your scanner, some features may not be available. Set the Brightness, Highlight, or Gamma Correction options to darker settings and scan the image again. If you selected Line Art as the Image Type setting and any setting other than Screen as your Destination setting, try increasing the Threshold setting to a higher value. Moiré (interference) patterns appear in the scanned image. Moiré patterns commonly occur when you scan images that include halftone screens. To minimize this effect, try any of the following solutions: Move or angle the original slightly Change the Sharpness setting Change the Scale setting slightly Select 3 pass for the Scanning Sequence. Troubleshooting 6-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
The image cannot be printed on the printer, the printout
is
garbled, or the printout is not an image.
Check that the printer is properly connected to your Macintosh
and is set up correctly; see your printer manual.
Check that your software is properly installed and set up for
your printer; see your software manual.
Images
cannot be scanned
at all or only a few dots appear in the
scanned image.
Try different EPSON TWAIN settings. Be aware that some
settings disable others for a particular effect. Also, depending
on your scanner, some features may not be available.
Set the Brightness, Highlight, or Gamma Correction options
to darker settings and scan the image again.
If you selected Line Art as the Image Type setting and any
setting other than Screen as your Destination setting, try
increasing the Threshold setting to a higher value.
Moiré (interference) patterns appear in the scanned image.
Moiré patterns commonly occur when you scan images that
include halftone screens. To minimize this effect, try any of the
following solutions:
Move or angle the original slightly
Change the Sharpness setting
Change the Scale setting slightly
Select 3 pass
for the Scanning Sequence.
Troubleshooting 6-11