Epson BrightLink 695Wi Installation Guide - Ultra-Short Throw Wall Mount ELPMB - Page 26
Attach the 3-axis adjustment unit and slide plate to the projector using the M4 × 12 mm hexagon
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2. Align the 3-axis adjustment unit with the slide plate's alignment mark. Alignment mark If the 3-axis adjustment unit is not aligned, loosen the M4 x 12 mm hexagon socket head cap bolt ( ) and correct the alignment ( ). Then, tighten the M4 × 12 mm hexagon socket head cap bolt. 3. Attach the 3-axis adjustment unit and slide plate to the projector. Attach the 3-axis adjustment unit and slide plate to the projector using the M4 × 12 mm hexagon socket head cap bolts (×4) supplied. Bolt locations 26
26
2.
Align the 3-axis adjustment unit with the slide plate’s alignment mark.
If the 3-axis adjustment unit is not aligned, loosen the M4 x 12 mm hexagon socket head cap bolt (
)
and correct the alignment (
). Then, tighten the M4 × 12 mm hexagon socket head cap bolt.
3.
Attach the 3-axis adjustment unit and slide plate to the projector.
Attach the 3-axis adjustment unit and slide plate to the projector using the M4 × 12 mm hexagon socket
head cap bolts (×4) supplied.
Alignment mark
Bolt locations