Epson BrightLink 697Ui DuoLink Setup Guide - Page 18
Matching Images for Multiple Projectors, Adjusting Color Uniformity
View all Epson BrightLink 697Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Matching Images for Multiple Projectors You can adjust the projectors' images to minimize any differences in brightness or color. Use these sections to adjust the image settings for each projector. Before adjusting the images, make sure you have used the Geometry Correction settings to align the projected images, and that both projectors are in the same Color Mode. In most cases, use the Presentation color mode for DuoLink installations. To change the Color Mode setting, press the Menu button and select the Extended > Multi-Projection > Color Mode setting. Adjusting Color Uniformity Adjusting the Projector's Brightness Level Matching the Image Colors Adjusting RGBCMY Parent topic: Configuring Projector Settings for Multiple Projectors Adjusting Color Uniformity If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each projector. (The color tone may not be uniform even after performing color uniformity.) Note: If you cannot adjust color uniformity, make sure the Color Mode setting is not set to Dynamic. 1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter. 18