Epson BrightLink Pro 1450Ui Installation Guide - Ultra-Short Throw Wall Mount - Page 31
English
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English 3. Insert the hexagonal shaft into the slot at the top of the wall plate ( ). 4. Insert the hexagonal shaft into the slot at the bottom of the wall plate ( ). Caution ❏ Make sure the Touch Unit connection cable is not wired into the wall with the other cables. ❏ Take care not to trap the cables between the mount arm and wall plate. 5. Secure the mount arm to the wall plate by tightening the supplied M6 × 20 mm cross recessed head shoulder screws (×3) with the #3 cross-head screwdriver ( ). Then, loosely tighten the M6 × 20 mm hexagon shoulder bolt supplied ( ). 31
31
English
3.
Insert the hexagonal shaft into the slot at the top of the wall plate (
).
4.
Insert the hexagonal shaft into the slot at the bottom of the wall plate (
).
5.
Secure the mount arm to the wall plate by tightening the supplied M6 × 20 mm cross recessed head
shoulder screws (×3) with the #3 cross-head screwdriver (
). Then, loosely tighten the M6 × 20 mm
hexagon shoulder bolt supplied (
).
❏
Make sure the Touch Unit connection cable is not wired into the wall with the other cables.
❏
Take care not to trap the cables between the mount arm and wall plate.
Caution